Volkswagen Passat Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(959)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(959)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Volkswagen Passat Power Steering Pressure Hose Replacement is $261 with $121 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Volkswagen PassatL4-1.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$521.42Shop/Dealer Price$588.51 - $775.18
1995 Volkswagen PassatV6-2.8LService typePower Steering Pressure Hose ReplacementEstimate$417.61Shop/Dealer Price$480.41 - $663.88
2013 Volkswagen PassatL5-2.5LService typePower Steering Pressure Hose ReplacementEstimate$854.21Shop/Dealer Price$1033.12 - $1565.68
1999 Volkswagen PassatL4-1.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$815.32Shop/Dealer Price$956.80 - $1373.71
2010 Volkswagen PassatV6-3.6LService typePower Steering Pressure Hose ReplacementEstimate$644.83Shop/Dealer Price$772.87 - $1149.50
1996 Volkswagen PassatL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$417.61Shop/Dealer Price$480.61 - $664.22
1996 Volkswagen PassatV6-2.8LService typePower Steering Pressure Hose ReplacementEstimate$417.61Shop/Dealer Price$480.46 - $663.96
1999 Volkswagen PassatV6-2.8LService typePower Steering Pressure Hose ReplacementEstimate$1515.58Shop/Dealer Price$1832.13 - $2774.23
Show example Volkswagen Passat Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(959)

Rating Summary
908
24
6
5
16
908
24
6
5
16

Rigoberto

12 years of experience
739 reviews
Rigoberto
12 years of experience
Volkswagen Passat L4-2.0L Turbo - Vent Oil Seperator - Chicago, Illinois
Rigo was great. He was friendly and professional and always took the time to answer all my questions.

Jared

17 years of experience
44 reviews
Jared
17 years of experience
Volkswagen Passat L4-1.8L Turbo - Power Steering Pump - Gresham, Oregon
The mechanic that you sent out was awesome. Great communication, very professional, and did a fantastic job. Overall I saved 300.00 by not taking it to the dealer.would highly recommend.

Jeremy

21 years of experience
802 reviews
Jeremy
21 years of experience
Volkswagen Passat L4-2.0L Turbo - Oil Change - West Palm Beach, Florida
A very knowledgeable and veteran mechanic.

Peter

13 years of experience
119 reviews
Peter
13 years of experience
Volkswagen Passat L5-2.5L - Power Steering Pump - Brentwood, California
Arrived on time and was able to properly replace the broken part.

Excellent Rating

(959)

Rating Summary
908
24
6
5
16
908
24
6
5
16
Number of Volkswagen Passat services completed
10549+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

The Guide To Colored Curb Zones in Mississippi
Mississippi Mississippi parking laws: understanding the basics A big part of the responsibility of driving is knowing where to park legally and safely. Mississippi drivers should take the time to understand the rules and laws of parking in the state...
A Buyer’s Guide to the 2012 Fit EV
The The 2012 Honda Fit EV is lots of fun to drive and offers a smooth ride to passengers. It is Honda’s first pure electric car, and it offers a range of 70 to 123 miles between charges. The Fit...
P0613 OBD-II Trouble Code: TCM Processor
P0613 means there is an malfunction within the transmission control module often due too shorted, electrical wiring or harness.

Howling noise coming from car

If there is a howling sound that comes on when a fan is turned on, then that may be a sign of a potential problem with the fan. Perhaps the fan's bearing has become worn, or the blades have somehow...

Using thermostat in a tropical regions

Yes, for most intents and purposes, if you live in a tropical region a lot of people take their thermostats out and don't need them. Now, there are certain cars (some high-tech cars) that are made to run with a...

TJ did an inspection on a 2008 Land Rover LR2 @Cars of Tampa Inc. How soon would some of the 'good' things need 2b worked on?

Hi Cassandra: I will try to help you. For safety reasons, the steering gear leak should be repaired first. After that the priority would be the replacement of the axles and then repair of the crankshaft seal leak. Technically, you...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com