Volkswagen GTI Spark Plug Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Spark Plug Replacement Service

How much does a Spark Plug Replacement cost?

On average, the cost for a Volkswagen GTI Spark Plug Replacement is $246 with $106 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Volkswagen GTIL4-2.0L TurboService typeSpark Plug ReplacementEstimate$383.48Shop/Dealer Price$444.20 - $618.26
2021 Volkswagen GTIL4-2.0L TurboService typeSpark Plug ReplacementEstimate$429.19Shop/Dealer Price$501.82 - $715.60
2008 Volkswagen GTIL4-2.0L TurboService typeSpark Plug ReplacementEstimate$374.47Shop/Dealer Price$433.45 - $606.20
2011 Volkswagen GTIL4-2.0L TurboService typeSpark Plug ReplacementEstimate$374.47Shop/Dealer Price$433.45 - $606.20
2007 Volkswagen GTIL4-2.0L TurboService typeSpark Plug ReplacementEstimate$374.47Shop/Dealer Price$434.92 - $608.78
2012 Volkswagen GTIL4-2.0L TurboService typeSpark Plug ReplacementEstimate$374.47Shop/Dealer Price$433.59 - $606.45
2013 Volkswagen GTIL4-2.0L TurboService typeSpark Plug ReplacementEstimate$374.47Shop/Dealer Price$433.46 - $606.23
2016 Volkswagen GTIL4-2.0L TurboService typeSpark Plug ReplacementEstimate$358.39Shop/Dealer Price$413.35 - $574.04
Show example Volkswagen GTI Spark Plug Replacement prices

What are spark plugs and how do they work?

Spark plugs are one of the key components of your vehicle’s ignition system. They ignite gasoline and air inside of your engine. This gives your engine the power to propel you down the road. The spark plug takes high voltage electricity from the ignition coil and creates a spark at just right moment during the engine’s combustion cycle. This gives the engine the best mix of power, fuel economy and low emissions. However, the electrode at the end of the spark plug eventually wears out and can cause performance issues.

Spark plugs-MATROX-1

When should you replace spark plugs?

Replacement should follow the vehicle maintenance schedule. This will be listed in the vehicle’s owner’s manual. Some cars require regular replacement at 30k, 60k or 100k miles. It is possible in some cases that a spark plug might fail before the service schedule, but it’s not typically common.

Avoiding spark plug replacement can cause:

  • Difficulty starting your car.
  • Check engine light for a misfire code.
  • Flashing check engine light during acceleration for misfire, this can cause engine damage.
  • Reduced fuel economy and/or power.
  • Rough idle and/or unexplained engine vibration.
  • Failed State emission testing.

Even if only one spark plug is found to be faulty, they should always be replaced in sets. Most engines will require 4,6, or 8 spark plugs.

How do mechanics replace spark plugs?

Spark plugs are threaded into the engine’s cylinder head(s). Most cars have one plug per cylinder, so a four-cylinder engine will have four plugs, a six-cylinder engine will have six plugs, and so forth. The mechanic will:

  • Have the correct spark plugs on hand for your vehicle
  • Pull any diagnostic trouble codes that may be related to worn spark plugs.
  • Remove the original spark plugs and look at removed spark plugs for any clues indicating engine mis-operation exists; such as oil burning, excessively rich mixture, pre-ignition damage etc. Inform owner of any found unusual conditions.
  • Install new plugs using a torque wrench.
  • Finally, a road test of the vehicle to confirm normal operation.

Is it safe to drive with worn spark plugs?

Yes, but spark plugs that are worn enough to cause engine-misfiring have the potential to cause engine damage and overheating of the catalytic converter. Regardless of the age of the plugs, or mileage, if the engine misfires or runs poorly, the plugs should be inspected for defects. Generally, spark plug failure will not keep the engine from running, but in cases of extreme wear, you may experience a limitation in the speed at which you can drive the car. If the maintenance schedule says the plugs should be replaced, it is best to do so promptly.

When having spark plugs replaced keep in mind:

  • High-speed driving may accelerate spark plug wear. Consider earlier than required inspection and tune-up if you operate the car in severe conditions.
  • Plugs should always be promptly replaced per the manufacturer maintenance schedule even if they appear to be working perfectly.
  • If your vehicle is equipped with spark plug wires (as opposed to a coil-on-plug system), the wires should be replaced at the same time. This may increase the cost of your repair.
  • It is possible that when doing a spark plug replacement, your vehicle may also need additional parts like ignition coils, this will add to the repair cost.
  • Some engines require that the intake manifold be removed while replacing spark plugs. This may increase the parts and labor cost for the repair.
  • Leaking valve cover gaskets, which have let oil get in contact with the spark plugs, coils or wires, may be the cause of ignition system issues. Valve cover gaskets will need to be replaced in addition to the spark plugs, wires or coils. This will add to the repair cost.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(9)

Rating Summary
8
1
0
0
0
8
1
0
0
0

Excellent Rating

(9)

Rating Summary
8
1
0
0
0
8
1
0
0
0
Number of Volkswagen GTI Spark Plug Replacement services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

What Does the Hybrid Drive System Malfunction Warning Light Mean?
The hybrid drive system malfunction light turns on when an issue is detected with the system. It could be due to problem with the battery or a fuse.
Symptoms of a Bad or Failing Ignition Lock Cylinder
Common signs include the car not starting, the key getting stuck in the ignition or not going in, and issues power on the vehicle.
P0720 OBD-II Trouble Code: Output Speed Sensor Circuit Malfunction
P0720 means there is an issue with the output speed sensor circuit. Issues may include engine stalling, misfiring and hesitation when accelerating.

Convertible top stuck

The hydraulic system that moves the top may have a leak or has taken in air and needs to be bled. When this happens, the pump continues to make noise, but the top stops moving. Have an automotive technician inspect...

shuts off after driving

If I was diagnosing your Hummer, I would want to know if there were any diagnostic trouble codes (DTCs) stored in any of the computer modules. I would see if the Check Engine light was on and use my scan...

Tire Pressure

The TPMS light relates to the tire pressure monitoring function of the sensors in the wheels that monitor tire pressure at each of the four wheels. I would recommend checking the tire pressure at each of the four wheels to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com