Volkswagen Atlas Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(22)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(22)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Volkswagen Atlas Control Arm Assembly Replacement is $484 with $316 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Volkswagen AtlasV6-3.6LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$818.60Shop/Dealer Price$981.07 - $1458.76
2018 Volkswagen AtlasV6-3.6LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$807.79Shop/Dealer Price$968.14 - $1444.24
2018 Volkswagen AtlasV6-3.6LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$807.79Shop/Dealer Price$968.17 - $1444.29
2018 Volkswagen AtlasV6-3.6LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$807.79Shop/Dealer Price$968.17 - $1444.29
2018 Volkswagen AtlasL4-2.0L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$807.79Shop/Dealer Price$969.94 - $1447.38
2018 Volkswagen AtlasL4-2.0L TurboService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$968.38Shop/Dealer Price$1131.12 - $1609.02
2018 Volkswagen AtlasL4-2.0L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$807.79Shop/Dealer Price$968.19 - $1444.32
2018 Volkswagen AtlasL4-2.0L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$968.38Shop/Dealer Price$1130.80 - $1608.45
Show example Volkswagen Atlas Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(22)

Rating Summary
20
2
0
0
0
20
2
0
0
0

Shaun

11 years of experience
542 reviews
Shaun
11 years of experience
Volkswagen Atlas L4-2.0L Turbo - Oil Change - Glendale, Arizona
Great guy, very friendly. I would definitely recommend Shaun to friends and family.

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Volkswagen Atlas V6-3.6L - Oil Change - Ladera Ranch, California
Very professional and safe as we are still in COVID-19

PETE

23 years of experience
96 reviews
PETE
23 years of experience
Volkswagen Atlas V6-3.6L - Oil Change - Wilmington, Delaware
Pete is great at communicating and has a lot of experience. I couldnt ask for an easier service for my vehicle. Thanks Pete.

Collins

13 years of experience
678 reviews
Collins
13 years of experience
Volkswagen Atlas V6-3.6L - Oil Change - Atlanta, Georgia
Amazing. Friendly, helpful, knowledgeable, went above and beyond in making sure the filter didn’t leak.

Excellent Rating

(22)

Rating Summary
20
2
0
0
0
20
2
0
0
0
Number of Volkswagen Atlas services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Replace an Anti-Lock Brake System (ABS) Fuse or Relay on Most Cars
Anti-lock brake systems have a fuse that fails if the ABS brake light is on or when the fuse is blown. The wheels may lock up if the ABS fuse is bad.
How to Buy a Good Quality Cooling System Flush
Your Your radiator does the important job of helping to keep the engine cool. Overheating can cause serious, expensive damage like a blown head gasket (which typically requires complete engine replacement) or warped cylinders. The radiator circulates and cools the...
Cell Phones and Texting: Distracted Driving Laws in Washington
Washington Washington defines distracted driving as taking attention away from the road or paying attention to something other than driving. Texting while driving is illegal for drivers of all ages in Washington. Furthermore, using handheld cell phones is illegal for...

Car turned off completely during highway driving

In order for an engine to continue running, it must have three things. These things are compression, fuel, and ignition. If one of those three things goes away, the engine will no longer run. I would recommend checking your alternator...

My car will shake/vibrate violently when trying to start or turn off the engine after filling up the gas tank

Hello. This occurs from the purge valve not working properly. It can also be a vent valve issue, but that is not as common. These are part of the EVAP emissions system. If the purge valve is not closed when...

02 Buick lesabre rotten egg smell engine light is on engine running too rich in bank 1

Hi there. In most cases, the rotten egg smell accompanied by an OBD-II trouble code that indicates a bank 1 or bank 2 lean issue is due to a worn out catalytic converter. The catalytic converter can also give off...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com