Toyota Prius V Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Toyota Prius V Fuel Injector Replacement is $1570 with $1122 for parts and $448 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2015 Toyota Prius VL4-1.8L Hybrid	Service typeFuel Injector Replacement	Estimate$2739.48	Shop/Dealer Price$3311.87 - $5003.12
2014 Toyota Prius VL4-1.8L Hybrid	Service typeFuel Injector Replacement	Estimate$2710.65	Shop/Dealer Price$3277.39 - $4964.40
2012 Toyota Prius VL4-1.8L Hybrid	Service typeFuel Injector Replacement	Estimate$2728.99	Shop/Dealer Price$3300.39 - $5001.22
2016 Toyota Prius VL4-1.8L Hybrid	Service typeFuel Injector Replacement	Estimate$2837.93	Shop/Dealer Price$3436.56 - $5219.09
2017 Toyota Prius VL4-1.8L Hybrid	Service typeFuel Injector Replacement	Estimate$2837.93	Shop/Dealer Price$3441.28 - $5227.34
2013 Toyota Prius VL4-1.8L Hybrid	Service typeFuel Injector Replacement	Estimate$2728.99	Shop/Dealer Price$3300.84 - $5002.00

Show example Toyota Prius V Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(58)

Rating Summary

54

4

0

0

0

54

4

0

0

0

SEE REVIEWS NEAR ME

Chris

23 years of experience

2372 reviews

Chris

23 years of experience

by Jeremy

Toyota Prius V L4-1.8L Hybrid - Water Pump Replacement - Costa Mesa, California

Chris did a great job on my Prius. He could tell, based on my vague description (I don't know a lot about cars) exactly where the problem was and how to fix it. He arrived before the original appointment time and was very quick in his service. He even gave me some recommendations on additional care for my car.

Attila

20 years of experience

1104 reviews

Attila

20 years of experience

by Sean

Toyota Prius V L4-1.8L Hybrid - Pre-purchase Car Inspection - Garfield, New Jersey

So helpful.. Knows what he is doing.. I made the decision to bushy the car based on his advice.. Will go back to him for sure.

AL

13 years of experience

245 reviews

AL

13 years of experience

by Brady

Toyota Prius V L4-1.8L Hybrid - Brake Rotor/Disc Replacement (Front) - Arvada, Colorado

Al communicated well, showed up early, and got the job done nicely!

Helder

33 years of experience

28 reviews

Helder

33 years of experience

by Kenneth

Toyota Prius V L4-1.8L Hybrid - Replace plastic undercarriage splash shields/covers (3 total) ; parts supplied by me - Cranston, Rhode Island

Helder texted and came early. He was to replace damaged splash shield cover parts. I got the parts, but alas I got some wrong parts. Helder reworked and repaired defective parts. Very creative mechanic. I thought I would have to pay and reschedule. Helder saved the day. He did leave a wooden block on a wheel..

Excellent Rating

(58)

Rating Summary

54

4

0

0

0

54

4

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

What are the Car Pool Rules in Louisiana?

Other Other than New Orleans, Louisiana is a pretty quiet state, made up of mostly land and scenic, rural roads (https://www.yourmechanic.com/article/top-10-scenic-drives-in-louisiana). Like in all other states though, many Louisiana citizens need to commute to work, and rely on the state’s...

P2047 OBD-II Trouble Code: Reductant Injector Circuit/Open Bank 1 Unit 1

P2047 P2047 trouble code definition The P2047 code is a general OBD2 trouble code that points to a fault within the reductant injector circuit. What the P2047 code means The P2047 code means a fault is present in the reductant...

How to Replace a Manifold Temperature Sensor

Signs of a failing manifold temperature sensor include rough idling and a rough running engine, and may result in a failed emissions test.

TPMS Light

First and foremost, you should have all the tires checked for the proper air pressure. You could have different air pressure levels on your tires and, after driving on longer trips, your tires will tend to heat up, causing the...

I lost my car key

Hello, thanks for writing in about your 2001 Toyota Corola. For an issue like this I recommend that you call Pop-A-Lock (http://www.popalock.com/) or a local locksmith. They can make one for you on the spot. I hope this helps and...

Where is ecm relay located 2008 impala lt

All fuses and relays in the vehicle will be located in the fuse box or power distribution box. The fuse box is usually located inside the vehicle or sometimes in the trunk. The most common spot for this relay to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com