Toyota Cressida Clunking or knocking noise from wheels Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(10)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(10)

Clunking or knocking noise from wheels Inspection Service

How much does a Clunking or knocking noise from wheels Inspection cost?

On average, the cost for a Toyota Cressida Clunking or knocking noise from wheels Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1978 Toyota CressidaL6-2.6LService typeClunking or knocking noise from wheels InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1987 Toyota CressidaL6-2.8LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1981 Toyota CressidaL6-2.8LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 Toyota CressidaL6-3.0LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1980 Toyota CressidaL6-2.6LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1988 Toyota CressidaL6-2.8LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1979 Toyota CressidaL6-2.6LService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1983 Toyota CressidaL6-2.8LService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Toyota Cressida Clunking or knocking noise from wheels Inspection prices

Clunking or knocking noises can be very disconcerting for any driver to hear while they are going down the road. While these noises may be a symptom of some different issues, all are usually related to a suspension component that has failed. When a suspension component has failed, the ride or the vehicle may be altered. If the failed component is not dealt with, it can lead to increasingly difficult and dangerous problems.

How this system works:

Your vehicle’s suspension system is designed to minimize friction between the tires and the road, ensuring a comfortable ride for you and your passengers. Many of the components that may cause a clunking or knocking noise are not only a part of the suspension, but help control the steering of the vehicle. Any issues regarding the steering or suspension of the vehicle should be looked at by a mechanic as they will only become worse over time.

Common reasons for this to happen:

  • Bad Ball Joints: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. If a ball joint is beginning to fail, you may notice a clunking noise coming from the front wheels. This clunking noise will become louder and more frequent over time. You may also notice that your steering has been affected by the bad ball joint, potentially causing vibration in the steering wheel.

  • Bad Sway Bar Link: A vehicle’s sway bar or anti-roll bar, helps reduce body roll while cornering. Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged.

  • Bad Tie Rods: Tie rods connect a vehicle’s steering rack to the steering arm. This helps translate the turning of the steering wheel to the direction of the tires. When a tie rod end is worn or loose, they may produce a clunking noise. Worn tie rod ends may also cause more play in the steering wheel, making turning more vague.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the clunking or knocking noise from the wheels. The mechanic will then provide a detailed inspection report outlining the reason for the noise and the cost of any repairs that need to be made.

How it's done:

Telling a mechanic about any unusual sensations, in addition to the clunking or knocking noise, you may have observed, will help him or her understand what went wrong with the vehicle.

The mechanic will begin by lifting the front of the vehicle off the ground and shaking the front tires to check for play. If there is play in the front tires, the mechanic will suspect bad ball joints. The mechanic will then remove the wheel and the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

If the mechanic suspects that the sway bar has gone bad, the mechanic will begin by examining the sway bar bushings. If the entire sway bar appears to be in tact the bushing may cause the clunking noise. The mechanic will then replace the bushings and the sway bar if necessary.

If the mechanic suspects the tie rods, he or she will examine the tie rods for damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

In all repairs, the mechanic will make sure after completing the necessary repairs that the car handles properly. He or she should ask to test drive the vehicle to ensure this.

How important is this service?

Suspension and steering components that have gone bad will only get worse over time. If you notice that your car is not handling well or that it has started producing a clunking or knocking noise, you should have it inspected by a mechanic. Issues with suspension and steering components could also lead to other issues, like prematurely worn tires. Being vigilant about repairs to these components can help ensure long-life for your vehicle.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0

Brian

22 years of experience
7 reviews
Brian
22 years of experience
Toyota Cressida L6-2.8L - Distributor Rotor and Cap - Portland, Oregon
Brian was timely, efficient, and knowledgeable. Thank you!

Peter

25 years of experience
524 reviews
Peter
25 years of experience
Toyota Cressida L6-2.8L - Spark Plugs - Valencia, California
Peter did a wonderful job. He explained in detail what he was doing and answered all my questions clearly. He performed his work up and beyond what I was hoping for. I highly recommend Peter.

Dave

23 years of experience
303 reviews
Dave
23 years of experience
Toyota Cressida L6-2.8L - Starter - Sunnyvale, California
Dave was on time plus very patient. He did a wonderful job! Thanks Dave!

Farnaz

20 years of experience
80 reviews
Farnaz
20 years of experience
Toyota Cressida L6-3.0L - Spark Plug Replacement - Irvine, California
Prompt arrival and excellent service!

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0
Number of Toyota Cressida services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1600+
experts on our platform

Recent articles & questions

What Sensors Make the ABS Work?
When When we are discussing ABS systems it is good to note the year and make of your vehicle because ABS systems have evolved quite a bit over the years, but you also have to know how the ABS system...
How to Sell Your Car
When it comes time to sell your car (https://www.yourmechanic.com/article/5-essential-things-to-know-about-selling-a-car), either because of an upgrade or a life change, then there are two primary options: trading it in at a dealer or selling it privately. If you trade a car in,...
How Does the Warranty Work?
Car Car repair is precise work because each part has an impact on both the overall functionality of the car as well as the other individual parts. If a mechanic replaces your leaking radiator hoses, the freshly sealed cooling system...

I need the measurements for brake/shoe pads left and right front and rear wheels

Hi there, thanks for writing in. I have always recommended brakes to be replaced if the pads are worn down (https://www.yourmechanic.com/article/how-to-recognize-brake-pad-wear-patterns-by-cheryl-knight) to 4/32 of an inch and the rear brake shoes worn down at its thinnest point to be 3/32....

Sounds like the timing belt is about to fail - 2004 Nissan 350Z

Hi and thanks for contacting YourMechanic. The 2004 350Z will have a timing chain. The noise you are hearing is the chain guides that are rubbing the chain. The guide materials are worn off and the guides need replacing. While...

I was told I have oil coming through the air intake does that mean I need a new engine??

If your PCV valve is clogged then you may get excessive blow by of combustion gases and oil into the intake system. You should have the PCV valve replaced and intake cleaned out of oil. If problem continues then you...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com