Subaru B9 Tribeca Lubricate Ball Joints at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(36)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(36)

Lubricate Ball Joints Service

How much does a Lubricate Ball Joints cost?

On average, the cost for a Subaru B9 Tribeca Lubricate Ball Joints is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Subaru B9 TribecaH6-3.0LService typeLubricate Ball JointsEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2007 Subaru B9 TribecaH6-3.0LService typeLubricate Ball JointsEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Subaru B9 Tribeca Lubricate Ball Joints prices

What is lubricating the ball joints all about?

Good suspension allows the wheels to move over bumps and potholes smoothly while making the car experience a very small amount of the jolt. In order for the wheels to move freely of the vehicle’s body, joints connect parts together while allowing them to move around. On parts that need to move in multiple directions at the same time, ball joints are the only solution.

Keep in mind:

  • To access the ball joint, wheels and brake components will usually have to be removed.
  • When lubricating the ball joint, the steering knuckle and other suspension components can be inspected for excess wear.
  • If a ball joint is covered in a rubber boot, the mechanic will make sure that the boot is still protecting the joint from dirt and debris.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The ball joints on the suspension system is located
  • The Zerk grease fittings on the ball joints are located
  • New grease is pumped into the grease fittings with a grease gun
  • The vehicle is lowered off of the jack stands

Our recommendation:

The ball joints should be lubricated when the manufacturer suggests. This information can usually be found in a vehicle’s manual. The lubricant may wear away prematurely if the joint is not properly protected. Servicing the ball joints usually requires the removal of the wheels and brakes. This allows access to other components that usually aren’t as easily serviceable. Other joints aside from the ball joint may need lubrication. Parts may be showing excess wear. The steering knuckle and control arm should be inspected as well. There are many kinds of suspension and steering components that a vehicle could have, so consult the vehicle’s manual for any model-specific repairs or services that may need to be done.

What are the common symptoms indicating you need to lubricate the ball joints?

  • Loud squeaking or groaning when the suspension moves or when steering
  • Steering or suspension seems to operate less smoothly

How important is this service?

This service is fairly important and affects crucial components in the vehicle. Proper lubrication of components is a staple of preventative maintenance. Ball joints have to be completely replaced when they become too worn, and wear happens much faster without proper lubrication.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(36)

Rating Summary
33
2
0
0
1
33
2
0
0
1

Brian

15 years of experience
60 reviews
Brian
15 years of experience
Subaru B9 Tribeca H6-3.0L - Other Inspections - Pompano Beach, Florida

Nicholas

11 years of experience
586 reviews
Nicholas
11 years of experience
Subaru B9 Tribeca H6-3.0L - Brake Pads Replacement (Front) - Chapel Hill, North Carolina
Job well done. Competent, trusted and courteous and communicates well!

Russell

27 years of experience
271 reviews
Russell
27 years of experience
Subaru B9 Tribeca H6-3.0L - Drive Belt Tensioner - Castro Valley, California
It was so convenient to have him come to the house and work on the car.

Attila

19 years of experience
910 reviews
Attila
19 years of experience
Subaru B9 Tribeca H6-3.0L - Loud squealing or squeaking is coming from timing belt - Paterson, New Jersey
excellent person and friendly I liked his good work

Excellent Rating

(36)

Rating Summary
33
2
0
0
1
33
2
0
0
1
Number of Subaru B9 Tribeca services completed
396+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
700+
experts on our platform

Recent articles & questions

How Does the Side Mirror Control Switch Work?
Older Older vehicles and cars with base trim levels may have manual mirror adjustment. The most basic method is adjusting the mirror glass directly on the mirror assembly, or it can be adjusted by a manual cable toggle control. While...
B1336 OBD-II Trouble Code: Door Ajar Right Rear Circuit Open
B1336 means there is an error with the door ajar right rear circuit, likely due to a faulty door ajar switch or circuit, or defective door latch.
B1983 OBD-II Trouble Code: Driver's Door Unlock Relay Circuit Short to Battery
B1983 means there is a short circuit issue in the driver's door unlock relay. This is likely due to a faulty electrical component.

What does the electronic brake force distribution (EBD) Warning Light mean?

The electronic brake force distribution (EBD) Warning Light is located on the instrument panel., and is a combination of the anti-lock brake system (ABS) and standard brake system Warning Lights. When the EBD illuminates, there is an issue with your...

My rpo code is m30 which means I have a 4l60e, what is the difference between ID code LAD and CAD will they interchange?

Hello, the transmission will bolt up to vehicle. The difference can be configuration of operating pressures, clutch pack stack and shift points. These codes are for engine and vehicle type match. The transmission will work just may not have...

2012 VW Tiguan. 124,000 miles. Cylinder 1 & 3 misfiring throwing codes p0303, p0301, and getting code p2293 for fuel pressure regulator. Car starts and then then starts misfiring and the immediately stalls out. Ive replaced MAF, throttle body, all spark plugs, and coils. What next?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com