Saturn Relay Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(16)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(16)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Saturn Relay Brake Master Cylinder Replacement is $392 with $210 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Saturn RelayV6-3.9LService typeBrake Master Cylinder ReplacementEstimate$620.70Shop/Dealer Price$730.18 - $1048.09
2006 Saturn RelayV6-3.9LService typeBrake Master Cylinder ReplacementEstimate$608.99Shop/Dealer Price$716.17 - $1032.36
2005 Saturn RelayV6-3.5LService typeBrake Master Cylinder ReplacementEstimate$608.99Shop/Dealer Price$716.20 - $1032.42
2006 Saturn RelayV6-3.5LService typeBrake Master Cylinder ReplacementEstimate$608.99Shop/Dealer Price$716.20 - $1032.41
Show example Saturn Relay Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(16)

Rating Summary
15
0
0
0
1
15
0
0
0
1

Abdul

12 years of experience
419 reviews
Abdul
12 years of experience
Saturn Relay V6-3.5L - Alternator - Tucker, Georgia
Working with Abduls was great. I felt he was friendly and professional.

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
Saturn Relay V6-3.9L - Car is making a noise - Redlands, California
Jay was very professional, prompt and thorough. Tons of experience and able to explain in laymans terms what was going on.

James

31 years of experience
1039 reviews
James
31 years of experience
Saturn Relay V6-3.9L - Camshaft Position Sensor Replacement - Orlando, Florida
He was very nice and out going great attitude and personality he does a great job

Chris

19 years of experience
600 reviews
Chris
19 years of experience
Saturn Relay V6-3.5L - Control Arm Assembly Replacement (Front Lower Right) - Houston, Texas
Chris was great. He is a knowledgable and honest mechanic. My car is fixed.

Excellent Rating

(16)

Rating Summary
15
0
0
0
1
15
0
0
0
1
Number of Saturn Relay services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Brake Master Cylinder
Common signs of a faulty brake master cylinder include abnormal brake pedal behavior, contaminated brake fluid, and the Check Engine Light turning on.
Windshield Laws in Louisiana
Louisiana Louisiana motorists know they are required to follow the rules of the road in order to be safe and legal when driving. In addition to traffic laws, drivers are also required to make sure that their windshield is in...
A Buyer’s Guide to the 2012 Mitsubishi Eclipse
2012 2012 marks the end of an era for the Eclipse and Mitsubishi sends the sporty little car off in style. As affordable sports cars go, the Eclipse has served its segment well with stylish looks, respectable performance, and a...

dealer tells me that the ECM damaged the throttle body. For $1,100 they are replacing both. Does that make sense?

Hi there. From the description you have provided, the ECM (electronic control module) may have been the problem from the start. When the TPS (throttle position sensor) codes were stored in the computer. This would of been the time to...

Does not idle

Hello. Low idling (https://www.yourmechanic.com/services/car-idle-is-rough-inspection) issues can be caused by several faults. Typically they are an effect of poor fuel and spark efficiency. When diagnosing this type of issue, you will want to start with the easiest parts to check, and...

Hi My Toyota Prius starts shaking on acceleration

HI there. Usually cleaning the MAF sensor is done with an aerosol cleaner like brake cleaner or carburetor cleaner. These have alcohols, so cleaning the sensor the way you did should not have an impact. In most cases, the type...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com