Saturn LS1 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(11)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(11)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Saturn LS1 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LS1L4-2.2LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Saturn LS1 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(11)

Rating Summary
10
0
0
0
1
10
0
0
0
1

Jesus

16 years of experience
68 reviews
Jesus
16 years of experience
Saturn LS1 L4-2.2L - Inspection / Diagnostics - Torrance, California
Fantastic service, and Jay was great at explaining the details and showing me what the problem was. Highly recommend him, and this service in general! Very helpful and in my case, needed because I couldn't drive my car.

Rey

25 years of experience
103 reviews
Rey
25 years of experience
Saturn LS1 L4-2.2L - Brakes, Steering and Suspension System - Ventura, California

Milton

37 years of experience
239 reviews
Milton
37 years of experience
Saturn LS1 L4-2.2L - Battery - Henderson, Nevada
Outstanding

Whitney

39 years of experience
783 reviews
Whitney
39 years of experience
Saturn LS1 L4-2.2L - Oil Change - Sunnyvale, California
Whitney called and apologized for running late [a first]. When he arrived, he was very polite, pleasant, knowledgeable, efficient and helpful. He changed the oil and filter, then checked the codes for my car [all clear]. He showed us where the "oil reset" button was and taught us what to do. Job was completed in about 20 minutes. Thank you Whitney for being so awesome. I look forward to future appointments.

Excellent Rating

(11)

Rating Summary
10
0
0
0
1
10
0
0
0
1
Number of Saturn LS1 services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

How to Know if You're Old Enough to Rent a Car
There There are many circumstances in life when you need transportation but don’t own a vehicle. Some of these situations include: You need to get around while you’re traveling away from home You need a reliable vehicle for a road...
Disabled Driver Laws and Permits in Nevada
If If you live in Nevada, and you have a disability, you could qualify for a special permit that lets you use handicapped parking spaces. You could qualify for a temporary, moderate, or permanent placard, permanent plate, or disabled veteran...
Electric Vehicles vs. Hybrid Cars
If you’re considering a car that requires less gas power, look into the benefits and drawbacks of both EVs and hybrids.

Pcv valve problem

Hello. In most case a PCV valve should not noticeably rattle, though that varies from engine to engine. If it appears to be rattling excessively that could signify that the PCV valve is not secured properly, that there is a...

Starter not engaging at all but passed bench test

You will need to check the voltage at the starter when someone is cranking it to make sure cables are sending all the voltage to it. You can do a voltage drop on the cables to see if one is...

I am unable to pop the old ignition switch out like i saw on youtube. I am using my phillipshead screwdriver but it is of no use

You will need to put key in and then turn to the on position. This is position just before you turn to start the truck and then you can push in the pin using a thin screw driver or punch...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com