Ram Dakota Oxygen Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Oxygen Sensor Replacement Service

How much does a Oxygen Sensor Replacement cost?

On average, the cost for a Ram Dakota Oxygen Sensor Replacement is $237 with $97 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Ram DakotaV6-3.7LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$349.08Shop/Dealer Price$401.20 - $549.46
2011 Ram DakotaV8-4.7LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$340.07Shop/Dealer Price$390.42 - $537.36
2011 Ram DakotaV8-4.7LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$423.33Shop/Dealer Price$494.52 - $703.92
2011 Ram DakotaV6-3.7LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$423.33Shop/Dealer Price$494.52 - $703.92
Show example Ram Dakota Oxygen Sensor Replacement prices

What is the Oxygen Sensor all about?

With each new model year, manufacturers are adding more oxygen sensors to better manage engine operation. Some high performance engines have an oxygen sensor for each cylinder as well as one for the rear of each catalytic convertor. The sensors are located either underneath the hood or underneath the car. The oxygen sensors are connected (screwed) to the exhaust pipe, either in front or back of the catalytic converter. The front (upstream) sensors measure the amount of oxygen in the exhaust system. The purpose of the front oxygen sensor(s) is to measure how rich or lean the gases are as the gases exit the combustion chamber. Depending upon whether the exhaust gas is lean (high in oxygen content) or rich (low in oxygen content), the amount of fuel entering the engine is adjusted by the engine management computer to try and maintain an ideal mixture that produces the lowest emissions output from the catalytic convertor.

Rear (downstream) sensors are located behind the catalytic converter. The purpose of the rear oxygen sensor(s) is to monitor the oxygen content of the exhaust gases leaving the catalytic convertor.

If one or more of the oxygen sensors are faulty, your car may not pass the emissions test. If you drive your car with a faulty oxygen sensor, you may get poor gas mileage and it can damage the catalytic converter.

Oxygen Sensor-MATROX-1

When replacing the oxygen sensor remember:

  • Many oxygen sensors are damaged by leaking oil or coolant. If that is the case, the cause of that leak needs to be identified and repaired, or else the replacement oxygen sensor will be damaged as well.
  • New vehicles require specific oxygen sensors, and not the universal sensors that were common prior to 1996.

How it's done:

  • Scan the computer in the car for codes.
  • Inspect for vacuum leaks and holes in the exhaust system.
  • Remove and replace the oxygen sensor if it is bad.
  • Check electrical connections.
  • Check for proper operation of oxygen sensors.
  • Clear diagnostic codes.
  • Test drive car.

Our recommendation:

Keep up with the tune-ups. If check engine light is on, don't drive the car too long without getting it inspected. If check engine light is flashing, pull over and get the car towed to avoid costly repairs. Ask the mechanic to inspect the vacuum hoses and leaks in the exhaust system. If the vacuum hose or exhaust system is leaking, it will display an oxygen sensor fault code. Replacing an oxygen sensor may not fix the problem.

What common symptoms indicate you may need to replace the Oxygen Sensor?

  • Check Engine light is on.
  • Car is getting poor gas mileage.
  • Emission test fails.

How important is replacing the oxygen sensor?

Your vehicle has multiple oxygen sensors, and they all help the car run optimally. The front sensors measure how much oxygen is in the exhaust stream to measure how rich or lean the gases leaving the gas chamber are. The rear sensors measure the oxygen content of the gases as they leave the catalytic converter. The oxygen sensors then relay this information to your vehicle’s electronic control unit, so that it can adjust as necessary. Because cars depend on an ideal fuel-to-air ratio to function optimally, the oxygen sensors are leaned on for engine performance. When your oxygen sensors fail your car will run less smoothly, get worse mileage, and have worse emissions.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Adam

17 years of experience
64 reviews
Adam
17 years of experience
Ram Dakota V8-4.7L - Shock Absorber Replacement (Rear) - Irving, Texas
Adam is very skilled and reliable.

Michael

5 years of experience
355 reviews
Michael
5 years of experience
Ram Dakota V8-4.7L - Car is not starting - Greenfield, Indiana
Michael carefully checked out problem and determined the problem, gave me a quote and set up a appointment while he was here!

Steven

22 years of experience
200 reviews
Steven
22 years of experience
Ram Dakota V8-4.7L - Spark Plugs - Irving, Texas
He was great. A lot of knowledge and very productive!

Michael

5 years of experience
355 reviews
Michael
5 years of experience
Ram Dakota V8-4.7L - Starter - Greenfield, Indiana
Fast, on time knew what to do and did it!

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Ram Dakota services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

How to Replace an Intake Air Temperature Sensor
An air temperature sensor, or air charge temperature sensor, signals a car’s computer about the air-to-fuel ratio. Replacing one requires few tools.
How to Buy Good Quality Sensors
Sensors Sensors for autos have many of the same characteristics that other types of sensors do – they are created to detect a signal, respond to chemical or physical variations such as distance or temperature. These signals are then converted...
How Long Does an EGR Pressure Feedback Sensor Last?
In In today's world people are more aware of exhaust gases than ever before. With that said measures have been built into modern vehicles that are meant to cut down on the emissions released into the air. Built into your...

My ABS light went up

In my experience the hub and sensor both needs to be replaced. The sensor will most likely break off when trying to remove it. If you do manage to get it out, the front hub bearings wear will cause erratic...

Hard transmission shifting, second time replaced

Hey there. This may be related to a bad or failing transmission control solenoid (https://www.yourmechanic.com/services/downshift-solenoid-replacement) or potentially the control module itself. As you know, the transmission control module has various sensors such as vehicle speed sensors (https://www.yourmechanic.com/services/speed-sensor-replacement), wheel speed sensors...

Driving down the road, the transmission stop pulling. Has code p0720. What sensor needs changing?

In the future, please include the model of Nissan and the motor size. This way we can be more certain we are giving you an accurate answer. The P0420 code has to do with the catalytic converter. It will either...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com