Ram C/V Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(9)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(9)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Ram C/V Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Ram C/VV6-3.6LService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2015 Ram C/VV6-3.6LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Ram C/VV6-3.6LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2012 Ram C/VV6-3.6LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Ram C/V Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

Chris

15 years of experience
312 reviews
Chris
15 years of experience
Ram C/V V6-3.6L - Brake Pads Replacement (Rear) - Spring Valley, California
Chris is not only a great mechanic, he is an honest trustworthy person. I appreciate his hard work and honesty.

Daniel

21 years of experience
346 reviews
Daniel
21 years of experience
Ram C/V V6-3.6L - Door Lock Actuator Replacement (Driver Side Front) - Rosharon, Texas
Very proffesional and efficient

Chris

15 years of experience
312 reviews
Chris
15 years of experience
Ram C/V V6-3.6L - Alternator - Spring Valley, California
Chris did a great job! He was on time and even early which he text me to see if it was ok and I was thrilled to get the work done earlier! I will use your service again!!! Thank you!

Duane

25 years of experience
510 reviews
Duane
25 years of experience
Ram C/V V6-3.6L - Brake System Flush - Spring Valley, California
Dwane was very professional. I have not driven my car yet, but I am sure the work will be outstanding.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Ram C/V services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

How to Make Your Own Biodiesel
Diesel Diesel is used to fuel many different types of machines including: Construction equipment Delivery vehicles Heavy-duty trucks Highway tractors Passenger vehicles Diesel-fired heaters Diesel fuel is an excellent source of energy because it is relatively safe compared to the...
How to Buy a Classic Fiat 124 Sport Spider
The Fiat 124 Sport Spider is a highly desirable compact convertible produced by the Italian carmaker from 1966 to 1982. Its classic design incorporates sporty performance with sleek European looks, to make it as fun to drive as it is...
What are the Car Pool Rules in Texas?
Texas Texas is the second most populous state in America, so it should come as no surprise that a large number of Texans are on the state’s freeways every single day. Millions of Texans rely on the state’s freeways to...

How much is a flywheel and torque converter? Are those parts worth replacing on my vehicle?

When the starter was diagnosed as bad the flywheel teeth the starter mate to when trying to turn over the engine may have broken or worn teeth and cannot engage each other anymore. Why the torque converter would need replaced...

error codes p0440 and p0404

Hi there. The codes you provided are commonly related to the EGR or Exhaust Gas Recirculation system; specifically the EGR valve or solenoid. You may want to read this article (https://www.yourmechanic.com/article/p0404-obd-ii-trouble-code-exhaust-gas-recirculation-circuit-range-performance-by-jay-safford) on what typically triggers these codes and possible solutions....

I have a 2004 Land Cruiser that is showing the following problems: (1) for the past several months, when I go to start it, it will

If the starter is not releasing from the flywheel, when you let go of the key, the starter likely has an internal fault. It is also possible that the circuit is not opening, as commanded, when you release the key....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com