Pontiac G8 Loud noises when car is put in gear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(34)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(34)

Loud noises when car is put in gear Inspection Service

How much does a Loud noises when car is put in gear Inspection cost?

On average, the cost for a Pontiac G8 Loud noises when car is put in gear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Pontiac G8V8-6.2LService typeLoud noises when car is put in gear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2008 Pontiac G8V6-3.6LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2009 Pontiac G8V8-6.0LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2008 Pontiac G8V8-6.0LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2009 Pontiac G8V6-3.6LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
Show example Pontiac G8 Loud noises when car is put in gear Inspection prices

When you put your car in gear, there should be minimal noise. The transmission should engage easily, and you should be able to drive without any effort. If you’re hearing loud noises when the car is put in gear, it could be one of several different problems depending on the type of noise in question and when exactly you’re hearing it. It may not even be related to the transmission.

How this system works:

When you put your car in gear, it puts a load on both the engine and the transmission. When you press the gas, that load changes. For this reason, engines and transmissions have mounts. These mounts cushion, support and secure both the engine and transmission, ensuring that the loading doesn’t translate into loud clunks, thunks, bangs and other abnormal sounds.

In addition, a number of things must happen when you put your car in gear (these will vary drastically depending on whether you’re driving a car with a manual or an automatic transmission). For instance, with a manual transmission, you must press in the clutch pedal, which engages the clutch and allows you to shift gears. If the clutch is worn, you may hear a grinding or screeching sound here.

In an automatic transmission, things work a little differently. There are clutch plates throughout, as well as bands that connect each gear. If either the clutch plates or the bands have suffered wear, it’s possible you’ll hear noises when the transmission changes gears.

Common reasons for this to happen:

  • Low Transmission Fluid: The most common reason for any transmission-related problem is low fluid. Your transmission requires the right amount of fluid to operate, and to protect internal components from wear and tear, heat and friction.

  • Failed Motor Mount: Another common cause of hearing a noise when putting your car into gear is a failed motor mount. Different makes and models use different types of mounts. Some are little more than rubber blocks, while others are hydraulic units. In either instance, a failed mount (or a missing motor mount bolt) will create a very loud noise when you put your car in gear.

  • Failing U-Joint: If you have a rear-wheel drive vehicle, the problem might not be with the engine or transmission, but with the drive shaft. A bad U-joint can cause a very loud sound when putting the car into gear. Play in the joint allows the shaft to flex incorrectly, causing noises and vibrations.

  • Worn Clutch: If you have a manual transmission, it’s possible that the clutch is worn out. This would make a screeching/grinding noise when attempting to put the car in gear.

  • Failing Pilot Bearing: This problem is only pertinent to manual transmissions, and only when engaging the clutch (pressing the clutch pedal in).

  • Failing Throw Out Bearing: If you hear a noise from your manual transmission when releasing the clutch, it could be a failed throw out bearing.

What to expect:

A professional mobile mechanic will visit your home or office to inspect the noise your car is making when putting it into gear. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to crank the car, and then put it in gear to verify and duplicate the noise. Based on this test, the mechanic will either have a diagnosis, or will need to inspect other components of the vehicle to verify their condition and operation. The actual steps taken will depend on the type of noise you’re hearing.

How important is this service?

Unusual noises when putting your car in gear should always be cause for alarm. It might be something relatively simple like a failed U-joint, but it might be a sign of transmission damage, or a failed motor mount, both of which are serious problems. One of our professional mechanics can diagnose and repair the problem for you.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(34)

Rating Summary
30
4
0
0
0
30
4
0
0
0

Johnny

33 years of experience
296 reviews
Johnny
33 years of experience
Pontiac G8 V6-3.6L - Check Engine Light is on - Sacramento, California
He showed up early, ran diagnostics, we discussed options finished up ,very polite and friendly and professional.

Jason

16 years of experience
24 reviews
Jason
16 years of experience
Pontiac G8 V6-3.6L - Alternator - Raleigh, North Carolina
I would highly recommend Jason to anyone seeking quick, friendly, and quality service. He showed up 10 minutes before set arrival time, and took no more than an hour to complete the job.

Rodric

14 years of experience
418 reviews
Rodric
14 years of experience
Pontiac G8 V8-6.0L - Strut Assembly Replacement (Front) - Mableton, Georgia
Really good mechanic. Respected the house and even laughed with my 1 year old.

Junior

26 years of experience
69 reviews
Junior
26 years of experience
Pontiac G8 V8-6.0L - Control Arm Assembly Replacement (Front Lower Right) - Hollywood, Florida
Friendly and knowledgeable

Excellent Rating

(34)

Rating Summary
30
4
0
0
0
30
4
0
0
0
Number of Pontiac G8 services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

How Long Does an Accelerator Pump Last?
If If you drive a newer vehicle, you may not be familiar with accelerator pumps. New vehicles almost invariably operate on a system of fuel injection, and the accelerator pump is a component of carbureted cars. In a carbureted vehicle,...
Mitsubishi Certified Pre-Owned (CPO) Car Program
If If you have been shopping for a used Mitsubishi vehicle, you may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on...
P2320 OBD-II Trouble Code: Ignition Coil G Secondary Circuit
P2320 P2320 code definition Ignition Coil G Secondary Circuit What the P2320 code means P2320 is an OBD-II generic code for the engine control module (ECM) (https://www.yourmechanic.com/article/what-is-a-vehicle-s-electrical-control-unit) detecting ignition coil G or 7 secondary circuit having low ionization. This means...

Car shakes when pressing gas pedal

If the vibration occurs only under acceleration, the tires are not the most likely culprit. Vibration caused by tires is common. Sometimes vibration can be better or worse at certain speeds, but unaffected by acceleration or deceleration. The rear driveshaft...

Rough idling - 1990 Chevrolet G30

This could be an issue with a blown head gasket. This would require a professional mechanic to check engine compression as well. This can occur without causing oil/coolant mixing. If you are still having trouble, a certified technician from YourMechanic...

Hi i have problems with my CHASSIS/VSA MODULATOR (NISSIN) FOR 2013 HONDA ACCORD SEDAN ex. I was wondering where I can find a video

The modulator should only be replaced if you have developed, or otherwise received, a conclusive diagnostic proving failure. For want of that you are likely wasting your time and money and also, as important, losing a valuable opportunity to understand...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com