Pontiac G5 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(46)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(46)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Pontiac G5 Power Steering Pressure Hose Replacement is $392 with $168 for parts and $224 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Pontiac G5L4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$583.34Shop/Dealer Price$672.94 - $928.76
2007 Pontiac G5L4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$847.96Shop/Dealer Price$1004.49 - $1467.48
2008 Pontiac G5L4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$847.96Shop/Dealer Price$1004.53 - $1467.55
2007 Pontiac G5L4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$568.92Shop/Dealer Price$655.73 - $909.47
2009 Pontiac G5L4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$568.92Shop/Dealer Price$658.09 - $913.59
2010 Pontiac G5L4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$568.92Shop/Dealer Price$655.96 - $909.86
Show example Pontiac G5 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(46)

Rating Summary
42
3
0
0
1
42
3
0
0
1

Stephen

13 years of experience
36 reviews
Stephen
13 years of experience
Pontiac G5 L4-2.2L - Alternator Repair - San Diego, California
If any customer is thinking about using Stephen's services, stop thinking and do it right now! Stephen was kind, smart, and amazing! My whole family agrees that we will being using stephen for now on! Best service I could ever wish for!

Barry

33 years of experience
31 reviews
Barry
33 years of experience
Pontiac G5 L4-2.2L - Brake Pads Replacement (Front) - Kansas City, Missouri
Barry arrived early at our request and did a great job for a fair price.

Johnathan

8 years of experience
191 reviews
Johnathan
8 years of experience
Pontiac G5 L4-2.2L - Car is not starting - Saint Louis, Missouri
Best guy I’ve ever met and does his job

Michael

28 years of experience
672 reviews
Michael
28 years of experience
Pontiac G5 L4-2.2L - Starter - Mesa, Arizona
Michael was on time quick and efficient. Very pleasant individual had a great experience .

Excellent Rating

(46)

Rating Summary
42
3
0
0
1
42
3
0
0
1
Number of Pontiac G5 services completed
506+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

How to Renew Your Car Registration in New Hampshire
With With all of the benefits that come along with living New Hampshire, in order to drive in this state legally, you will have to take the time to register your car with the New Hampshire DMV. Once you have...
P0083 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 1 Sensor 2)
P0083 P0083 code definition P0083 is a general OBD2 code indicating a issue with bank 2 intake valve control solenoid. This code may be seen with P0081 and P0082. The vehicle also has a bank 1 valve control solenoid. What...
P0059 OBD-II Trouble Code: Heater Circuit Resistance (Bank 2 Sensor 1)
P0059 P0059 trouble code definition The definition of diagnostic trouble code p0059 is that the resistance for the heater circuit of bank 2 sensor 1 oxygen sensor is not correct. What the P0059 code means When this trouble code sets...

Car surges forward when I go down a gear

Hello, from what you describe it sounds like the engine control unit (https://www.yourmechanic.com/book/?mktg_jid=580) has some form of faulty programming. Mazda has released Technical Service Bulletin (TSB) 01-020/13 for updated engine control unit software to resolve RPM flair on downshifts. If...

Do the parts of a 2001 odyssey fit a 2004 odyssey body parts and mechanical ?

There were minor exterior body changes in the 2002-2004 Odyssey's, so even if the parts bolt up, they may not line up exactly properly. That said, it will look better than having a smashed up Odyssey, and it may be...

Water got into my motor

The first thing to do is to remove all the spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement), air filter (https://www.yourmechanic.com/services/air-filter-replacement), and check the engine oil to see if it has not been overfilled. Then turn over the motor to see if it will turn....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com