Nissan Pathfinder Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(664)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(664)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Nissan Pathfinder Power Steering Pressure Hose Replacement is $197 with $102 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1987 Nissan PathfinderV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$493.03Shop/Dealer Price$595.67 - $878.82
1989 Nissan PathfinderV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$471.03Shop/Dealer Price$573.69 - $856.86
2018 Nissan PathfinderV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$858.48Shop/Dealer Price$1045.64 - $1562.04
1993 Nissan PathfinderV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$439.83Shop/Dealer Price$536.04 - $802.16
1988 Nissan PathfinderV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$471.03Shop/Dealer Price$573.70 - $856.88
2008 Nissan PathfinderV8-5.6LService typePower Steering Pressure Hose ReplacementEstimate$513.32Shop/Dealer Price$614.19 - $871.72
2003 Nissan PathfinderV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$410.61Shop/Dealer Price$490.58 - $697.16
2009 Nissan PathfinderV6-4.0LService typePower Steering Pressure Hose ReplacementEstimate$634.66Shop/Dealer Price$763.84 - $1105.23
Show example Nissan Pathfinder Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(664)

Rating Summary
628
20
1
1
14
628
20
1
1
14

Chris

10 years of experience
31 reviews
Chris
10 years of experience
Pathfinder 2013 - Brake Pads - Ogden, UT
I was worried about booking a mechanic online. Chris was very professional and knowledgeable. I will definitely be using him again.

Chris

10 years of experience
31 reviews
Chris
10 years of experience
Pathfinder 2013 - Axle / CV Shaft Assembly - Ogden, UT
I was worried about booking a mechanic online. Chris was very professional and knowledgeable. I will definitely be using him again.

Gustavo

15 years of experience
12 reviews
Gustavo
15 years of experience
Pathfinder 2001 - Alternator - Glen Ridge, NJ
Very helpful mechanic, definitely would recommend. Took the time to diagnose issue and show me the result.

Terrence

0 years of experience
7 reviews
Terrence
0 years of experience
Pathfinder 2017 - Car is not starting - Charlotte, NC
Terrence arrived on time and was extremely professional. He is very knowledgeable, and has no problem explaining step by step of what he is doing so you fully understand the what and why's. He was great!

Excellent Rating

(664)

Rating Summary
628
20
1
1
14
628
20
1
1
14
Number of Nissan Pathfinder services completed
7304+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

Are There Windshield Wipers that Work Better for Snow?
It It seems you can’t go wrong choosing wiper blades to use in warmer climates. Any wiper blade with a good quality rubber edge does the trick. When snow and ice enter the equation, suddenly your choice of windshield wipers...
How to Buy a Good Quality Air Filter
The The air filter is a vital component of the car’s engine and fuel system. Without it, dust, debris, and other particles would make their way through the fuel system and eventually ruin the engine. The air filter is typically...
How to Apply Reflective Tape to Your Car
Applying Applying reflective tape to your car or truck is an inexpensive way to customize (https://www.yourmechanic.com/article/how-to-customize-a-car) it, allowing it to stand out from the crowd. The process is also simple enough that most people can do it themselves, saving the...

My truck gets bad fuel mileage and smells like gasoline.

It sounds like your engine may be running rich. Something like the EGR sensor could be bad. That would cause you to lose about 3 MPG. I would have a technician, such as one from YourMechanic come and check the...

Shudder or bounce after hitting bump

Hello there, thank you for writing in. Based off of your details, you may first want to concentrate on diagnosing the speed sensitive vibration at 40-50 MPH because that will be easier to resolve. I would place wireless chassis ears...

Water leak on the leff rear floor, 2000 buick lesabre it has 26000 miles

If there is no perforation in the sheet metal, due to rust for example, leaks like that you are describing are due to failed seals. Water can travel, so it takes a bit of tracking (back tracking) to find the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com