Nissan Pathfinder Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(664)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(664)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Nissan Pathfinder Mass Airflow Sensor Replacement is $213 with $118 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Nissan PathfinderV6-4.0LService typeMass Airflow Sensor ReplacementEstimate$485.85Shop/Dealer Price$588.57 - $874.21
2018 Nissan PathfinderV6-3.5LService typeMass Airflow Sensor ReplacementEstimate$699.41Shop/Dealer Price$860.53 - $1321.36
2009 Nissan PathfinderV6-4.0LService typeMass Airflow Sensor ReplacementEstimate$465.85Shop/Dealer Price$568.58 - $854.24
1997 Nissan PathfinderV6-3.3LService typeMass Airflow Sensor ReplacementEstimate$619.25Shop/Dealer Price$760.31 - $1161.00
2015 Nissan PathfinderL4-2.5L Turbo HybridService typeMass Airflow Sensor ReplacementEstimate$426.91Shop/Dealer Price$519.92 - $776.39
2013 Nissan PathfinderV6-3.5LService typeMass Airflow Sensor ReplacementEstimate$465.85Shop/Dealer Price$568.58 - $854.24
1993 Nissan PathfinderV6-3.0LService typeMass Airflow Sensor ReplacementEstimate$580.59Shop/Dealer Price$710.62 - $1078.48
1994 Nissan PathfinderV6-3.0LService typeMass Airflow Sensor ReplacementEstimate$580.59Shop/Dealer Price$710.99 - $1079.14
Show example Nissan Pathfinder Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(664)

Rating Summary
628
20
1
1
14
628
20
1
1
14

Chris

10 years of experience
31 reviews
Chris
10 years of experience
Pathfinder 2013 - Brake Pads - Ogden, UT
I was worried about booking a mechanic online. Chris was very professional and knowledgeable. I will definitely be using him again.

Chris

10 years of experience
31 reviews
Chris
10 years of experience
Pathfinder 2013 - Axle / CV Shaft Assembly - Ogden, UT
I was worried about booking a mechanic online. Chris was very professional and knowledgeable. I will definitely be using him again.

Gustavo

15 years of experience
12 reviews
Gustavo
15 years of experience
Pathfinder 2001 - Alternator - Glen Ridge, NJ
Very helpful mechanic, definitely would recommend. Took the time to diagnose issue and show me the result.

Terrence

0 years of experience
7 reviews
Terrence
0 years of experience
Pathfinder 2017 - Car is not starting - Charlotte, NC
Terrence arrived on time and was extremely professional. He is very knowledgeable, and has no problem explaining step by step of what he is doing so you fully understand the what and why's. He was great!

Excellent Rating

(664)

Rating Summary
628
20
1
1
14
628
20
1
1
14
Number of Nissan Pathfinder services completed
7304+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

Can Sensors Be Cleaned or Do They Need to Be Replaced?
In In most cases, sensors for your automobile will need to be replaced if they fail, but depending on the type of sensor and its location or function, some can be cleaned and reused (https://www.yourmechanic.com/question/can-sensors-be-cleaned-or-do-they-need-to-be-replaced). Sensors can come in many...
How Long Does a Yaw Rate Sensor Last?
While While taking a curve at a high rate of speed seems like fun, it can also be quite dangerous. Luckily, there are a number of systems on a car that can make taking hairpin turns quickly much safer. The...
How to Replace the Oil Temperature Sensor on Most Cars
Oil, as well as the oil temperature sensor, is crucial to the engine lubrication system. A bad sensor can lead to leaks and poor vehicle performance.

2.0L diesel sluggish acceleration

I would suggest checking the MAF sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) for starters, but also check timing to be sure it set properly. This can affect the fuel economy and the acceleration for sure. When the timing is not correct, the combustion cycle...

Where is Crankshaft Position Sensor on 2011 VW Routan with 3.6L engine?

The crankshaft position sensor (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-crankshaft-position-sensor) is located in the right rear of the engine block. There is a protective shield that needs to be removed for access to the sensor.

Car will overheat if I don't have the fan on. When fan is off it doesn't come on to release heat from engine. So the fan is always on.

Check the wiring to the coolant temperature sensor and see if there is power to the sensor switch. If there is no power, then check the cooling fan relay and see if its clicking on. If there is no clicking...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com