Nissan Pathfinder Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Nissan Pathfinder Car Battery Replacement is $291 with $151 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Nissan PathfinderV6-3.5LService typeCar Battery ReplacementEstimate$466.56Shop/Dealer Price$548.05 - $784.42
2011 Nissan PathfinderV8-5.6LService typeCar Battery ReplacementEstimate$469.17Shop/Dealer Price$551.80 - $795.56
2011 Nissan PathfinderV6-4.0LService typeCar Battery ReplacementEstimate$447.01Shop/Dealer Price$524.12 - $751.28
1993 Nissan PathfinderV6-3.0LService typeCar Battery ReplacementEstimate$513.15Shop/Dealer Price$606.80 - $883.56
2015 Nissan PathfinderL4-2.5L Turbo HybridService typeCar Battery ReplacementEstimate$471.49Shop/Dealer Price$556.20 - $802.82
2022 Nissan PathfinderV6-3.5LService typeCar Battery ReplacementEstimate$745.99Shop/Dealer Price$897.99 - $1349.49
2016 Nissan PathfinderV6-3.5LService typeCar Battery ReplacementEstimate$447.01Shop/Dealer Price$524.14 - $751.31
2009 Nissan PathfinderV6-4.0LService typeCar Battery ReplacementEstimate$469.17Shop/Dealer Price$551.82 - $795.60
Show example Nissan Pathfinder Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0

Nathan

13 years of experience
314 reviews
Nathan
13 years of experience
Pathfinder 1997 - Battery - Austin, TX
It was quick and great!

Chris

10 years of experience
31 reviews
Chris
10 years of experience
Pathfinder 2013 - Brake Pads - Ogden, UT
I was worried about booking a mechanic online. Chris was very professional and knowledgeable. I will definitely be using him again.

Chris

10 years of experience
31 reviews
Chris
10 years of experience
Pathfinder 2013 - Axle / CV Shaft Assembly - Ogden, UT
I was worried about booking a mechanic online. Chris was very professional and knowledgeable. I will definitely be using him again.

Gustavo

15 years of experience
12 reviews
Gustavo
15 years of experience
Pathfinder 2001 - Alternator - Glen Ridge, NJ
Very helpful mechanic, definitely would recommend. Took the time to diagnose issue and show me the result.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0
Number of Nissan Pathfinder Car Battery Replacement services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

P0236 OBD-II Trouble Code: Turbocharger Boost Sensor A Circuit Range/Performance
P0236 code definition Turbocharger Boost Sensor A Circuit Range/Performance What the P0236 code means P0236 is an OBD-II generic code that is...
P0913 OBD-II Trouble Code: Gate Select Actuator Circuit High
P0913 means the transmission gate select actuator circuit is malfunctioning, most likely a result of faulty wiring.
2012 Nissan Altima vs. 2012 Volkswagen Passat: Which One Should I Buy?
Sedans are a special class of vehicle: created to provide a comfortable and often luxurious ride to those who have passed beyond the need to stick to the compact class. These slightly larger vehicles offer options the compacts and subcompacts...

How do I calculate the fuel economy?

Calculating fuel economy will help you keep track of how much gas your truck uses. Knowing this is helpful to most drivers. To calculate the fuel economy. Fill the fuel tank completely and record the odometer reading. If you refill...

Turn signal won't blink

Hi there. If the turn signals will come on, but will not blink then the flasher module has failed. This module is what turns the lights off and on when the turn signal or hazards are used. It is possible...

Is this a normal fuel pump problem?

Yes, that sounds about right. The price for a fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement) and connector to the pump is normal for your Chevrolet Cobalt. The gas cap (https://www.yourmechanic.com/services/gas-cap-replacement) is a common problem also. Best of luck.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com