Nissan NV1500 Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,124)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,124)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Nissan NV1500 Brake Pad Replacement is $168 with $73 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Nissan NV1500V6-4.0LService typeBrake Pads - Rear ReplacementEstimate$283.59Shop/Dealer Price$331.99 - $450.19
2014 Nissan NV1500V6-4.0LService typeBrake Pads - Front ReplacementEstimate$261.03Shop/Dealer Price$309.81 - $429.11
2015 Nissan NV1500V6-4.0LService typeBrake Pads - Front ReplacementEstimate$261.03Shop/Dealer Price$309.81 - $429.10
2019 Nissan NV1500V6-4.0LService typeBrake Pads - Front ReplacementEstimate$259.55Shop/Dealer Price$307.93 - $426.10
2013 Nissan NV1500V6-4.0LService typeBrake Pads - Front ReplacementEstimate$242.03Shop/Dealer Price$288.82 - $406.63
2017 Nissan NV1500V6-4.0LService typeBrake Pads - Front ReplacementEstimate$242.03Shop/Dealer Price$288.81 - $406.60
2014 Nissan NV1500V6-4.0LService typeBrake Pads - Rear ReplacementEstimate$415.93Shop/Dealer Price$501.77 - $732.62
2013 Nissan NV1500V6-4.0LService typeBrake Pads - Rear ReplacementEstimate$395.93Shop/Dealer Price$480.17 - $709.82
Show example Nissan NV1500 Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(1,124)

Rating Summary
1,080
29
5
0
10
1,080
29
5
0
10

Jose

15 years of experience
213 reviews
Jose
15 years of experience
Nissan NV1500 V6-4.0L - Oil Change - Norcross, Georgia
Jose not only arrived on time he called to see if he could be there early. He is a very friendly, smiling and polite young man. I immediately felt I could trust him and as far as I know, he did a good job. I will ask for him personally on all of my truck and car maintenance and repair. Your Mechanic is a great business model and I think everyone should support them so they will succeed and be around from now on. I've found in the last fourty years of automobile ownership, that regular maintenance and upkeep will extend the life of a vehicle significantly. I believe Jose can do any of this and more.

Mark

8 years of experience
38 reviews
Mark
8 years of experience
Nissan Altima L4-2.5L - Brake Pads Replacement (Front, Rear) - Sanford, Florida
Great, quick and professional

Eliseo

12 years of experience
239 reviews
Eliseo
12 years of experience
Nissan Altima L4-2.5L - Brake Pads Replacement (Front, Rear) - Houston, Texas
He was on time and did agreat job . Professional

Raymond

37 years of experience
407 reviews
Raymond
37 years of experience
Nissan Altima L4-2.5L - Brake Pads Replacement (Front) - Las Vegas, Nevada
Raymond arrive on time to my place, did the job, finished the job earlier than what is expected. Outstanding job!

Excellent Rating

(1,124)

Rating Summary
1,080
29
5
0
10
1,080
29
5
0
10
Number of Nissan Brake Pad Replacement services completed
12364+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

What Does "Twin-Cam" Mean?
Twin-cam engines use two camshafts to operate the intake and exhaust valves. DOHC engines often have better power and efficiency than SOHC engines.
How to Become a Race Car Driver
It It goes without saying that race cars are a lot of fun. Anyone who enjoys cars and driving is bound to love race cars; they accelerate and brake faster than normal cars, handle far better, and are driven on...
P0309 OBD-II Trouble Code: Cylinder 9 Misfire Detected
P0309 means one of the engine cylinders is not firing properly due to a faulty coil, or sensor, spark plug, wiring, fuel injector or low fuel level.

Ac and heater are not blowing air

Hi there: In many cases, the failure of the blower motor to actually blow air into the cabin is caused by a blower motor resistor (https://www.yourmechanic.com/article/how-long-does-a-heater-blower-motor-resistor-last). This component is usually installed behind the dashboard or underneath the blower motor and...

My car is a 2001 Toyota Corolla. It will not go in reverse. When i shift it into reverse it doesn't move backwards and when I push

You should check the fluid level in the transmission to see if it is low on fluid or the fluid is burnt. If it is low then have leak checked and top off fluid to see if it now moves...

My AC is not working properly. I have a 2008 Honda CRV

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com