Nissan D21 Window Motor Regulator Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(50)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(50)

Window Motor Regulator Replacement Service

How much does a Window Motor Regulator Replacement cost?

On average, the cost for a Nissan D21 Window Motor Regulator Replacement is $251 with $111 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Nissan D21L4-2.4LService typeWindow Motor / Regulator Assembly - Passenger Side Front ReplacementEstimate$415.20Shop/Dealer Price$483.85 - $681.70
1993 Nissan D21V6-3.0LService typeWindow Motor / Regulator Assembly - Passenger Side Rear ReplacementEstimate$611.23Shop/Dealer Price$722.44 - $1051.12
1990 Nissan D21L4-2.4LService typeWindow Motor / Regulator Assembly - Driver Side Front ReplacementEstimate$443.37Shop/Dealer Price$519.57 - $744.00
1992 Nissan D21L4-2.4LService typeWindow Motor / Regulator Assembly - Driver Side Front ReplacementEstimate$443.37Shop/Dealer Price$519.57 - $744.00
1994 Nissan D21V6-3.0LService typeWindow Motor / Regulator Assembly - Passenger Side Rear ReplacementEstimate$611.23Shop/Dealer Price$724.24 - $1054.26
1992 Nissan D21V6-3.0LService typeWindow Motor / Regulator Assembly - Driver Side Front ReplacementEstimate$597.41Shop/Dealer Price$712.26 - $1052.33
1991 Nissan D21L4-2.4LService typeWindow Motor / Regulator Assembly - Passenger Side Front ReplacementEstimate$406.19Shop/Dealer Price$473.11 - $669.67
1993 Nissan D21L4-2.4LService typeWindow Motor / Regulator Assembly - Passenger Side Rear ReplacementEstimate$611.23Shop/Dealer Price$722.47 - $1051.17
Show example Nissan D21 Window Motor Regulator Replacement prices

What is the Window Motor/Regulator Assembly all about?

The window regulator typically has over a dozen components that help it move up or down in a very specific fashion throughout the entire raising or lowering of your windows. These components all work together in two unique assemblies: the scissor style window regulator and the cable operated window regulator.

There are scissor-style window regulators that operate like a giant pair of scissors inside your door. They’re usually almost flat when your window is all the way down and in a near perfect X when the window is all the way up. You can look at a scissor style regulator as having several thick pieces of steel that keep the window in place. It’s sturdy, but requires a strong motor that often wears out before everything else.

Cable-operated window regulators use a near vertical cable to help the window get into the right position. It’s a more compact design that puts less stress on the motor. But it is also more susceptible towards breaking due to the increased stress that the pulley and cable must harness to raise and lower your window. In most cases, a cable operated window regulator is composed of one thick piece of metal with a pulley and wire attached to it -- along with a more compact motor.

The electric motor is designed to withstand a certain number of raises and lowerings of your window. While the regulator helps hold the window in place, the motor provides the force needed to make the window stay exactly where you like.

Keep in mind:

  • A window regulator assembly is composed of two components: a motor and a regulator. These components when replaced typically require you to deal with the removal of your door panel, clips, and in certain cases, even the removal of rivets and the specific removal of multiple related components.

  • A window regulator assembly is usually a complicated piece of equipment that can require specialized tools and a lot of patience -- work best left to a professional mechanic.

How it's done:

  • The inside door panel is removed
  • The electrical connection is disconnected and motor removed
  • The window regulator is replaced
  • The window motor is reinstalled
  • The inside door panel is reinstalled and the window is tested

Our recommendation:

If your window is gradually beginning to slow down it’s often better to take care of it while the window can be shut. Once a window regulator stops working completely, it rarely starts working again unless you have other issues that can be identified by a mechanical inspection.

You should have it inspected by a professional mechanic who can test the multiple components that provide the power needed to make the window and regulator assembly work properly.

What common symptoms indicate you may need to replace the Window Motor/Regulator Assembly?

  • If your window is going down ever more slowly, stopping, or needs several presses of the power window button to close, chances are your motor is wearing out.

  • The window regulator assembly can also get off track or completely detach from the window. If you find that the window doesn’t close evenly or hear banging noises inside your door, that assembly may need a closer look.

How important is this service?

A properly operating window motor and regulator allow you, your passengers, and your car's interior to remain dry and safe. Sometimes a window regulator will stop working entirely without the window being fully closed. So of course, getting this service done sooner is better than waiting for an outright failure to occur..

The interiors and power features of your vehicle can also get damaged due to one heavy rainfall that can happen when you least suspect it. So if you’re having issues now, keep you and your car dry by having the issues looked at.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(50)

Rating Summary
46
1
0
1
2
46
1
0
1
2

Larry

17 years of experience
65 reviews
Larry
17 years of experience
Nissan D21 L4-2.4L - Radiator - Atlanta, Georgia
On time and very knowledgeable.

Chris

16 years of experience
312 reviews
Chris
16 years of experience
Nissan D21 L4-2.4L - Coolant is leaking - San Diego, California
Was good and professional

Jose

18 years of experience
36 reviews
Jose
18 years of experience
Nissan D21 L4-2.4L - Water Pump - Orlando, Florida

Eliud

24 years of experience
312 reviews
Eliud
24 years of experience
Nissan D21 L4-2.4L - Car is not starting - Grayson, Georgia
Excellent service

Excellent Rating

(50)

Rating Summary
46
1
0
1
2
46
1
0
1
2
Number of Nissan D21 services completed
550+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

P2402 OBD-II Trouble Code: EVAP Leak Detection Pump Control Circuit High
What the P2402 code means? P2402 is an OBD-II generic code for the engine control module (ECM) detecting the evaporative system leak...
How to Install an Ignition Switch
When When your ignition switch (https://www.yourmechanic.com/parts/ignition-switch) fails, it can cause a number of different issues. You may experience anything from a failure to start, to a stalling problem, to a series of electrical issues. There is never a good time...
How Speeding Tickets Affect Your Car Insurance
A speeding ticket can increase your car insurance rates, especially if you have a history of reckless driving. Drive safely to keep your prices low.

Engine misfiring in a 2007 BMW 328i

Your BMW is fuel injected so I'm guessing you cleaned out your throttle body. The next thing I would look into is the coil for the culprit cylinder, have a certified mechanic, like one from YourMechanic, inspect your vehicle (https://www.yourmechanic.com/services/engine-is-misfiring-inspection)...

2001 Isuzu Rodeo Transmission is jumping high but doesn't pick up speed right away. What could be wrong?

Hi there. Generally speaking, when this type of problem occurs, its caused by one of two transmission issues. Either the torque converter is starting to fail or you have an inner leak or obstruction of transmission fluid, caused either by...

WHEN REPLACING THE CAMSHAFT PHASERS ON A 2012 LANDROVER 2.0L HOW ARE THE PHASERS ALIGHNED AS THERE IS NO KEYWAY

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com