logo

Nissan Altima Wheel Stud Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(8)

Wheel Stud Replacement Service

How much does a Wheel Stud Replacement cost?

On average, the cost for a Nissan Altima Wheel Stud Replacement is $124 with $29 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Nissan AltimaL4-2.4LService typeWheel Stud - Passenger Side Front ReplacementEstimate$186.89Shop/Dealer Price$214.87 - $276.29
2010 Nissan AltimaL4-2.5L HybridService typeWheel Stud - Driver Side Rear ReplacementEstimate$187.09Shop/Dealer Price$220.13 - $296.72
2006 Nissan AltimaL4-2.5LService typeWheel Stud - Driver Side Rear ReplacementEstimate$194.29Shop/Dealer Price$229.13 - $311.12
2008 Nissan AltimaL4-2.5LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$194.29Shop/Dealer Price$229.11 - $311.08
2011 Nissan AltimaL4-2.5L HybridService typeWheel Stud - Driver Side Front ReplacementEstimate$187.09Shop/Dealer Price$220.15 - $296.75
2014 Nissan AltimaV6-3.5LService typeWheel Stud - Driver Side Rear ReplacementEstimate$194.29Shop/Dealer Price$229.13 - $311.12
2002 Nissan AltimaV6-3.5LService typeWheel Stud - Driver Side Front ReplacementEstimate$259.28Shop/Dealer Price$299.92 - $386.25
2013 Nissan AltimaV6-3.5LService typeWheel Stud - Passenger Side Front ReplacementEstimate$199.29Shop/Dealer Price$234.37 - $316.54
Show example Nissan Altima Wheel Stud Replacement prices

What are wheel studs and how do they work?

Wheel studs are high-strength, threaded steel fasteners that securely hold the wheel and tire assembly to the axle hub. Typically, there are 4 to 6 studs per wheel pressed or threaded into the wheel hub. The wheel and tire assembly is mounted on the hub centering ring and the studs protrude from the hub through the wheel mounting holes. Lug nuts are threaded onto the studs to securely hold the wheel to the hub.

When to consider replacing wheel studs:

  • Wheel is loose or wobbling. The wheel and tire assembly must be held evenly and securely to the wheel hub by the lug nuts attached to the studs. If the lug nuts are not tightened securely, it can cause the wheel to vibrate, loosen and wobble, which can damage or even break the wheel studs and lug nuts, potentially causing the wheel to separate from the vehicle.
  • Missing or broken studs, or damaged threads. If the stud is missing or broken, the lug nut attached to the stud will be missing and the wheel will hold securely. When the threads on the stud are worn, rusted away, or otherwise damaged, the lug nut may not achieve the required torque and could come loose while driving.
  • Stud turns in place when fastening lug nut. When the stud spins in the wheel hub while tightening, it should be replaced. During replacement, the mounting hole in the wheel hub should be inspected for damage.

How do mechanics replace wheel studs?

  • The car is raised and supported on steel jack stands.
  • The wheel and tire assembly, brake rotor, and caliper are removed.
  • On vehicles where there is sufficient access at the back of the wheel hub, a compact tool is used to press the defective stud out of the hub.
  • On vehicles where there is no access to use a compact stud remover, the wheel hub must be removed. When the hub must be pressed out of the steering knuckle, the wheel bearing is typically replaced in the process of removing the hub. Sometimes, the entire hub and bearing assembly with the studs included can be replaced.
  • The new stud or studs are pressed into position from the back of the hub, the brake caliper and rotor are reinstalled, and the wheel is placed onto the studs.
  • The wheel lug nuts are tightened to the factory specifications.

Is it safe to drive with wheel stud problems?

No, but you can temporarily drive a vehicle at low speeds and for short trips with one missing wheel stud. However, if more than two studs are broken, it is recommended to repair the car prior to further use. Having all wheel studs in place with evenly tightened lug nuts prevents distortion of the brake rotor. Over longer periods, missing studs can damage the brake rotor, the wheel, and the remaining studs. A car may vibrate when driving with missing wheel studs and can cause the other studs or lug nuts to loosen. This can lead to the wheel separating from your tire while driving.

When replacing wheel studs keep in mind:

  • Wheel studs are made of high-strength steel. If a stud has broken, it is typically due to previous overtightening. Lug nuts should be tightened using a calibrated torque wrench or a torque limiting device.
  • Published torque values assume that studs are dry, clean, and free of all lubricants. Oil, grease, anti-seize or any similar compound should not be applied to the threads of a wheel stud or lug nut.
  • Should a vehicle require removal of the wheel hub to add a new wheel stud, studs on the hub should be replaced. However, only defective studs need to be replaced if there is access from the back of the hub.
  • Lug nuts should be tightened in a star or crisscross pattern specified by the original equipment manufacturer in order to avoid warping of the brake rotor or drum as well as damaging the wheel.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Nissan Altima Wheel Stud Replacement services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(8)
Rating Summary
8
0
0
0
0
8
0
0
0
0

Excellent Rating

(8)
Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Nissan Altima Wheel Stud Replacement services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

A Buyer’s Guide to the 2012 Honda CR-Z
In In the tradition of the sporty CRX, the CR-Z boasts some of the similar look, without quite the same amount of pep. That’s because the CR-Z is Honda’s eco-friendly offering and a pretty unique one to boot – (as...
Read more
How to Buy Good Quality Struts
Vehicle Vehicle struts serve a number of different purposes, including adding control to extreme handling conditions such as sudden turning and braking. They also serve to provide a level of comfort to passengers in the vehicle as they provide a...
Read more
How to Get Audi Dealership Certified
Audi car dealerships offer automotive technician jobs to mechanics who are Audi certified through the Audi Academy Technician Training Program.
Read more

Car doesn't start even after jumpstart.

We need to determine if the engine is turning over or if nothing is happening when you turn the key. If it is turning over but not starting then you will need to check the ignition system or the fuels...
Read more

Problem with car dying

This is a sign of a failing idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement). This is a unit that is located on or near your intake manifold that monitors the air intake as it is mixed with fuel prior to being injected...
Read more

P0054

Hello. Without having the vehicle here for examination it is hard to say if it is safe for a longer trip. The code your car was detecting is for the heated oxygen sensors, and the technician replacing them was the...
Read more
  1. Home
  2. Estimates
  3. Nissan
  4. Altima
  5. Wheel Stud Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE