Nissan 350Z Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(280)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(280)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Nissan 350Z Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Nissan 350ZV6-3.5LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2007 Nissan 350ZV6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 Nissan 350ZV6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2003 Nissan 350ZV6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2004 Nissan 350ZV6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2009 Nissan 350ZV6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2005 Nissan 350ZV6-3.5LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
Show example Nissan 350Z Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(280)

Rating Summary
259
11
2
4
4
259
11
2
4
4

David

16 years of experience
635 reviews
David
16 years of experience
Nissan 350Z V6-3.5L - Brake Pads Replacement (Rear) - Antioch, California
David communicated at all times. He is very professional and knowledgeable. I felt at ease talking with him and knowing that my car was in good care as if it was his own. Highly recommend!

Jason

28 years of experience
22 reviews
Jason
28 years of experience
Nissan 350Z V6-3.5L - Car Radiator Replacement - Richmond, California
He arrived on time, looked at the parts made sure they were correct, replaced the parts finished off by my signing, and then left.

Joshua

13 years of experience
19 reviews
Joshua
13 years of experience
Nissan 350Z V6-3.5L - Oil Cooler Adapter Gasket - Discovery Bay, California
Excellent job done

David

13 years of experience
393 reviews
David
13 years of experience
Nissan 350Z V6-3.5L - Valve Cover Gasket - Canton, Georgia
No complaints. Took his time. Did not rush through. Made sure things were right.

Excellent Rating

(280)

Rating Summary
259
11
2
4
4
259
11
2
4
4
Number of Nissan 350Z services completed
3080+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

What Sensors Do All Cars Have? And What Optional Ones Are There?
Modern cars have an increasing amount of sensors. Most cars have an oxygen sensor and a throttle position sensor, but parking sensors are optional.
How Does a Radiator Keep an Engine Cool?
Car radiators cool off your engine and prevent your engine from overheating. Coolant absorbs engine heat and dissipates it through the radiator.
How to Silence Car Exhaust
Exhaust systems get rid of harmful gases as you drive your car. Car exhausts make noise when there are cracks or leaks in the car exhaust.

Delay in shifting, sudden jerk forward - 2015 Acura TLX

Hi! "Unsafe to drive", are the words you may want to use when you bring it to the Acura dealer service department since it is still under the warranty. There have been some issues with the transmission on the Acura...

Car is throwing trouble code P0746 and it is a solenoid valve problem.

This code (https://www.yourmechanic.com/article/p0746-obd-ii-trouble-code-pressure-control-solenoid-performance-or-stuck-off-by-valerie-johnston) relates to the pressure control solenoid that regulates the pressure of the transmission fluid flowing in and out of the valve body inside the transmission. Generally, this is usually related to some kind of foreign material that...

Can my 1999 town car use 89 octane even though it says 91

If your vehicle says premium fuel only on the gas gauge then you should use only the premium fuel. In a pinch you can run the 89 octane fuel and try not to do any heavy acceleration to avoid engine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com