Mitsubishi Sigma Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,085)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,085)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Mitsubishi Sigma Front Crankshaft Seal Replacement is $723 with $177 for parts and $546 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Mitsubishi SigmaV6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$1073.80Shop/Dealer Price$1205.17 - $1567.67
Show example Mitsubishi Sigma Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(2,085)

Rating Summary
1,950
76
16
13
30
1,950
76
16
13
30

Nathan

22 years of experience
298 reviews
Nathan
22 years of experience
Mitsubishi Eclipse L4-2.4L - Front Crankshaft Seal - Buda, Texas
Nathan is incredibly knowledgeable, friendly, and incredibly efficient in his work pace. He was able to diagnose my car with ease and was super flexible in coordinating the repair to make sure everything he could do got done. 10/10 will look to him for repairs in the future

Keven

8 years of experience
187 reviews
Keven
8 years of experience
Mitsubishi Lancer L4-2.0L - Front Crankshaft Seal Replacement - Bellevue, Washington
Smooth process! Keven knows his stuff, arrived on time, and is extremely easy going and fun to talk with. Finished the task faster than expected. A+

David

37 years of experience
195 reviews
David
37 years of experience
Mitsubishi Lancer L4-2.0L - Front Crankshaft Seal - Pasadena, California
Once again, David came through. Did the job well, explained the issue and did not try and up sell me (one thing mechanics seem to do all the time). He also finished BEFORE the estimated time of completion he originally stated. Well done!

Toby

11 years of experience
100 reviews
Toby
11 years of experience
Mitsubishi Mirage L3-1.2L - Brake Pads Replacement (Front) - Irving, Texas
Toby was very knowledgeable and professional! He's a very kind person and I would definitely hire him again in the future.

Excellent Rating

(2,085)

Rating Summary
1,950
76
16
13
30
1,950
76
16
13
30
Number of Mitsubishi services completed
22935+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
800+
experts on our platform

Recent articles & questions

How to Get an EPA License as an Automotive Technician
Automotive technician jobs require an EPA certification to learn how about the environment while repairing automotive air conditioning systems.
A Buyer's Guide to the 2012 Mazda CX-9
If If you’re having a hard time picking between a luxury sedan and an SUV, the 2012 Mazda CX-9 is definitely worth a look. It has the exterior of a mid-size SUV, but inside, you’ll find a world of luxury...
P0314 OBD-II Trouble Code: Single Cylinder Misfire (Cylinder not Specified)
P0314 P0314 code definition A P0314 trouble code indicates that the Powertrain Control Module (PCM) has detected an engine misfire in a single cylinder that was powerful enough to damage the catalytic converter. In conjunction with the storage of the...

What does it mean if the Vehicle Stability Assist Off indicator comes on?

The vehicle stability assist (VSA) system on your car is designed to help provide better traction, stability and handling during certain driving conditions. However, it doesn’t have to be on, and there are times when you’ll want to turn it...

Audi A3 Quattro Misfires while idling

Hello. If the misfire is only on that cylinder, then it may have a bad spark plug (https://www.yourmechanic.com/services/spark-plugs-replacement) or ignition coil (https://www.yourmechanic.com/services/ignition-coil-replacement). The coils are a common failure on this vehicle. If the misfire is on multiple cylinders, then the...

I have an 08 dodge charger 2.7l. I changed my water pump, reset my timing chain (used timing marks) but now engine won't start. Th

If the check engine light is on, codes were stored. As an initial step, those codes should be read as they may have essential clues to what is going on. To have the codes read, and the no start resolved,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com