Mitsubishi Galant Throttle Body Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Mitsubishi Galant Throttle Body Replacement is $602 with $507 for parts and $95 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2002 Mitsubishi GalantL4-2.4L	Service typeThrottle Body Replacement	Estimate$1137.27	Shop/Dealer Price$1402.84 - $2177.05
2012 Mitsubishi GalantL4-2.4L	Service typeThrottle Body Replacement	Estimate$1330.19	Shop/Dealer Price$1647.64 - $2575.18
2006 Mitsubishi GalantL4-2.4L	Service typeThrottle Body Replacement	Estimate$1330.17	Shop/Dealer Price$1647.61 - $2575.13
2008 Mitsubishi GalantV6-3.8L	Service typeThrottle Body Replacement	Estimate$2040.61	Shop/Dealer Price$2535.63 - $3995.97
1991 Mitsubishi GalantL4-2.0L	Service typeThrottle Body Replacement	Estimate$1755.87	Shop/Dealer Price$2179.75 - $3426.56
2005 Mitsubishi GalantL4-2.4L	Service typeThrottle Body Replacement	Estimate$1330.17	Shop/Dealer Price$1647.61 - $2575.13
2009 Mitsubishi GalantL4-2.4L	Service typeThrottle Body Replacement	Estimate$1335.67	Shop/Dealer Price$1652.96 - $2580.37
1988 Mitsubishi GalantV6-3.0L	Service typeThrottle Body Replacement	Estimate$2041.03	Shop/Dealer Price$2532.12 - $3975.40

Show example Mitsubishi Galant Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

The engine cover is removed, if necessary.
The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
The electrical connections to the throttle body are removed.
If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
All cables and electrical connections are restored. The intake air snorkel is reconnected.
If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(426)

Rating Summary

391

19

4

6

6

391

19

4

6

6

SEE REVIEWS NEAR ME

Jerimiah

19 years of experience

328 reviews

Request Jerimiah

Jerimiah

19 years of experience

Request Jerimiah

by Richard

Mitsubishi Galant L4-2.4L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Las Vegas, Nevada

good experinence,he the mechanic i will use in the future

Melvin

17 years of experience

221 reviews

Melvin

17 years of experience

by Dolphus

Mitsubishi Galant L4-2.4L - Car is not starting - Atlanta, Georgia

Ben

41 years of experience

1410 reviews

Ben

41 years of experience

by Boming

Mitsubishi Galant V6-3.0L - Radiator - Houston, Texas

Came to the appointment on time in the early morning. Very knowledgeable and skillful man. Changed the radiator perfectly within 40minutes. Also gave my car a detailed report. Thanks a lot Ben. Pleasure to do business with. Will definitely recommend to my friends.

Mazyar

8 years of experience

464 reviews

Mazyar

8 years of experience

by Roberto

Mitsubishi Galant L4-2.4L - Oil Change - Snellville, Georgia

Marvelous job done by Mazyar on my car. He was friendly and does not mind if you watch him perform the job. He will even show you what he is doing and how. He too will show you if he finds a problem with the vehicle so you can see for yourself. I say this because he was only supposed to change the oil and filter but I told him about a noise I keep hearing in the suspension. He inspected the suspension while he was underneath the car and came to find out it was the stabilizer bar links. He was patient at finding the issue and never rushed through it just because it was not part of the service. This shows me that he indeed cares about the customer and its vehicle and does not mind doing extra, as long as the customer is satisfied with his work and and all questions are answered. I will sure be using him for future services.

Excellent Rating

(426)

Rating Summary

391

19

4

6

6

391

19

4

6

6

SEE REVIEWS NEAR ME

Recent articles & questions

How to Replace a Lost or Stolen Car Title in New Jersey

While While you may think you have placed your car title somewhere safe there is no guarantee that it won't be lost at some point or even worse it could be stolen. This title is what proves you are the...

How to Change Front Brake Pads

Brake pads are failing when the brakes are noisy, the brake pedal pulsates when pressed, or there is poor brake response when the pedal is pressed.

What is the Automatic Transmission Fluid Service all about?

How to replace your automatic transmission fluid

Defrost button wont come on. Control power button doesnt work.

It seems like the defrost of the vehicle has an issue. There are several possibilities that could cause this. The control unit for the climate control system could be malfunctioning. The fuse for the rear defrost could be blown due...

Poor acceleration and rough idling at times.

This may be related to a dirty or failing idle air control valve, or throttle position sensor. The idle air control valve is a unit that reads the air intake as it is mixed with fuel, prior to being injected...

Transmission making noise that relates to engine rpm.

Hi there. Shut the engine off and check the fluid on the transmission dipstick. If the transmission fluid is low and not registering on the dipstick, then top it off until it reads full. Then start the vehicle and top...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com