Mini Cooper Paceman Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Mini Cooper Paceman Headlight Bulb Replacement is $125 with $30 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Mini Cooper PacemanL4-1.6L TurboService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$174.73Shop/Dealer Price$207.17 - $265.10
2014 Mini Cooper PacemanL4-1.6L TurboService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$154.73Shop/Dealer Price$187.20 - $245.15
2013 Mini Cooper PacemanL4-1.6LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$154.73Shop/Dealer Price$187.20 - $245.15
2013 Mini Cooper PacemanL4-1.6LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$154.73Shop/Dealer Price$187.16 - $245.08
2014 Mini Cooper PacemanL4-1.6L TurboService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$154.73Shop/Dealer Price$187.22 - $245.20
2013 Mini Cooper PacemanL4-1.6LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$154.73Shop/Dealer Price$187.20 - $245.15
2014 Mini Cooper PacemanL4-1.6L TurboService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$159.73Shop/Dealer Price$191.96 - $249.73
2014 Mini Cooper PacemanL4-1.6LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$159.73Shop/Dealer Price$192.61 - $250.87
Show example Mini Cooper Paceman Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mini mechanics

Real customer reviews from Mini owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Jeremy

20 years of experience
592 reviews
Jeremy
20 years of experience
Mini Cooper Paceman L4-1.6L - Check Engine Light is on - West Palm Beach, Florida
Great attitude and work.

Rodney

36 years of experience
541 reviews
Rodney
36 years of experience
Mini Cooper Paceman L4-1.6L Turbo - Coolant is leaking - Sacramento, California
Excellent service.

Rodric

14 years of experience
414 reviews
Rodric
14 years of experience
Mini Cooper Paceman L4-1.6L Turbo - Loud noises when car is put in gear Inspection - Lilburn, Georgia
Rodric was courteous and professional!

Luke

17 years of experience
150 reviews
Luke
17 years of experience
Mini Cooper Paceman L4-1.6L Turbo - Oil Change - Austin, Texas
It was great

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Mini Cooper Paceman services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mini MECHANICS
400+
experts on our platform

Recent articles & questions

How to Find a GPS Tracker in Your Car in 5 Steps
Using the right tools and methods, check the exterior and interior to find a GPS tracking device in your car
How to Bleed Car Brakes
Bleeding brakes removes trapped air from the car brake system and flushes old fluid and contaminants. Bleed brakes when the brake pedal is spongy.
PCM vs. ECM: What's the difference?
ECMs (engine control modules) and PCMs (powertrain control modules) are both onboard computing systems in your car. One predates the other.

Dash gauges acting weird.

I can't give you much advice without knowing which warning lights are coming on. As far as the oil pressure gauge is concerned, it could be a problem with the oil pressure sending unit, the sending unit circuit or the...

I disconnected the battery to clean the recepticles, then reconnected and went to start the truck.. now it won't start.

Hello. Thank you for writing in. There are several issues that may be contributing to your symptoms. The battery may be failing. If the battery is on its way out, it may be able to supply the needed energy for...

how to install front disc brake pads

Brake pads can be accessed by unbolting the brake caliper from the torque plate. If you are installing new brake pads, though, such must be done at the same time that the brake rotors are re-surfaced or replaced and all...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com