Mercury Tracer Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(23)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(23)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Mercury Tracer Car Thermostat Replacement is $156 with $61 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Mercury TracerL4-1.8LService typeCar Thermostat ReplacementEstimate$251.65Shop/Dealer Price$295.82 - $405.81
1990 Mercury TracerL4-1.6LService typeCar Thermostat ReplacementEstimate$748.27Shop/Dealer Price$921.61 - $1419.08
1995 Mercury TracerL4-1.9LService typeCar Thermostat ReplacementEstimate$247.55Shop/Dealer Price$294.33 - $409.89
1991 Mercury TracerL4-1.9LService typeCar Thermostat ReplacementEstimate$247.55Shop/Dealer Price$294.31 - $409.85
1998 Mercury TracerL4-2.0LService typeCar Thermostat ReplacementEstimate$251.41Shop/Dealer Price$299.18 - $417.64
1999 Mercury TracerL4-2.0LService typeCar Thermostat ReplacementEstimate$242.69Shop/Dealer Price$288.26 - $400.17
1988 Mercury TracerL4-1.6LService typeCar Thermostat ReplacementEstimate$235.95Shop/Dealer Price$279.82 - $389.20
1995 Mercury TracerL4-1.8LService typeCar Thermostat ReplacementEstimate$236.65Shop/Dealer Price$281.07 - $391.26
Show example Mercury Tracer Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(23)

Rating Summary
22
1
0
0
0
22
1
0
0
0

Cesar

9 years of experience
292 reviews
Cesar
9 years of experience
Mercury Tracer L4-1.8L - Car is not starting - Lynnwood, Washington
Will do all my car work with him from now on. Absolutely the best mechanic I've ever met. Super honest and fair. Great quick work. Flexible.

Kyle

13 years of experience
145 reviews
Kyle
13 years of experience
Mercury Tracer L4-2.0L - Spark Plugs - Dallas, Texas
Kyle was very professional, willing to go above and beyond to complete the job. He even found a loose wire that was part of the problem. He also found that some wires had been switched up. He could have just completed the job and left, but he took the extra step. Kyle is a good worker and very respectful.

Chris

16 years of experience
18 reviews
Chris
16 years of experience
Mercury Tracer L4-2.0L - Bleed Brakes - Dallas, Texas
Very quick, this is the second time, Chris has worked on my car. I can not express my gratitude at how professional he is. I will gladly book Chris if further work is need on my car.

Ira

36 years of experience
259 reviews
Ira
36 years of experience
Mercury Tracer L4-2.0L - Car is overheating - Tampa, Florida
very professional,he told me all my options,and explain all options well

Excellent Rating

(23)

Rating Summary
22
1
0
0
0
22
1
0
0
0
Number of Mercury Tracer services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

How to Get Rid of Your Old Car
When your vehicle is no longer roadworthy, that doesn’t mean it isn’t worth any money. No matter how old or run down you vehicle might be, there’s still a chance to get money for it. There are a lot of...
How to Replace a Car Track Bar
Replacing a track bar involves lifting the car in the air and using a wrench to tighten the bar at the correct torque specification.
How to Replace a Throttle Controller
The throttle controller uses data to open and close the throttle. Common signs of failure include poor performance, stalling, and and rough idling.

What Causes Leaks in a Car's AC System?

Automotive air conditioning (AC) is a closed loop system comprised of four main mechanical parts: the compressor, condenser, evaporator, and depending on system design, receiver drier or accumulator. Refrigerant is circulated through these components with the refrigerant pressure and temperature...

Car creaking when turning left

Hello. There are many potential reasons for the car to be creaking when turning. The problem could be the ball joint, tie rod end, strut mount, or CV axle. In order to have this diagnosed, I would have a trained...

My car emits white smoke, which I think is too much. What could be possibly wrong.?

Hi there. When there is white smoke emitting from the exhaust system, that is a sign of coolant in the exhaust system. Check the coolant level and see if its low. If the coolant is low, then check the engine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com