Mercury Monterey Clutch Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Clutch Switch Replacement Service

How much does a Clutch Switch Replacement cost?

On average, the cost for a Mercury Monterey Clutch Switch Replacement is $262 with $167 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Mercury MontereyV6-4.2LService typeClutch Switch ReplacementEstimate$449.75Shop/Dealer Price$543.44 - $802.01
2006 Mercury MontereyV6-4.2LService typeClutch Switch ReplacementEstimate$429.75Shop/Dealer Price$523.46 - $782.04
2007 Mercury MontereyV6-4.2LService typeClutch Switch ReplacementEstimate$429.75Shop/Dealer Price$523.46 - $782.04
2005 Mercury MontereyV6-4.2LService typeClutch Switch ReplacementEstimate$429.75Shop/Dealer Price$523.44 - $782.00
Show example Mercury Monterey Clutch Switch Replacement prices

What is the Clutch Switch all about?

A number of new features makes manual transmission cars easier to drive on an everyday basis, including the clutch switch. This simple device is a safety feature, designed to prevent the engine from starting while the transmission is in gear. That doesn’t mean you have to put the transmission in neutral to start the car, though. The switch prevents the starter from actuating unless the clutch pedal is pressed to the floor. It mounts to the back of the clutch pedal assembly, and is really nothing more than a clutch-specific on/off switch. When the pedal is free, the switch is off. When you press it to the floor, the switch activates, turning the system on and allowing the engine to crank.

Keep in mind:

  • Like your brake light switch and other electronic components that see regular use, the clutch switch will wear out over time and require replacement.
  • Because it’s an electronic component, there is no visible wear and tear that would indicate a problem.

How it's done:

  • The under dash panels by the clutch pedal are removed
  • The defective clutch switch is disconnected and removed from the clutch pedal support
  • The new clutch switch is installed and adjusted
  • The electrical connector is connected to the new switch and the panels are re-installed
  • The vehicle is started to check the clutch switch for proper operation

Our recommendation:

If you’re experiencing problems that seem consistent with intermittent switch failure (the car sometimes won’t crank with the pedal depressed fully), have it diagnosed by one of our expert mechanics.

What common symptoms indicate you may need to replace the Clutch Switch?

  • Engine won’t start even with the clutch pedal depressed fully
  • Intermittent “no start” with the pedal depressed
  • The car will start without the clutch pedal pressed in

How important is this service?

While your clutch switch is a relatively simple part, your car won’t operate until a new one is installed in place of the broken one. However, switch failure will not prevent you from driving the car if it has already started – it only prevents the engine from cranking. Have your car diagnosed as soon as possible to prevent any inconvenience.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0

Jeff

13 years of experience
46 reviews
Jeff
13 years of experience
Mercury Monterey V6-4.2L - Car is not starting - Reisterstown, Maryland
He communicated well upon scheduling and when he would arrive for the appointment. He was thorough and explained his diagnosis of the problem. Highly recommend.

Hiram

25 years of experience
55 reviews
Hiram
25 years of experience
Mercury Monterey V6-4.2L - Serpentine/Drive Belt - Tomball, Texas
He knows what he is doing does a great job

Roneil

12 years of experience
22 reviews
Roneil
12 years of experience
Mercury Monterey V6-4.2L - Oil Change - Hollywood, Florida
He was awesome very professional and knowledgeable.

Patrick

33 years of experience
1412 reviews
Patrick
33 years of experience
Mercury Monterey V6-4.2L - Oil Change - Austin, Texas
Very professional, on time and ready to work. I especially appreciated the report showing me potential trouble areas. Spot on!

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0
Number of Mercury Monterey services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

How to Buy Good Quality Seat Covers
Kids, Kids, pets, even you – nearly everything that enters your vehicle is tough on your car seats. We live in our cars these days, and everything from sodas from lunch to glitter and mud are going to stick into...
Symptoms of a Bad or Failing Ignition Relay
Common signs include the car stalling or not starting, a dead battery, and a burned relay.
P0427 OBD-II Trouble Code: Catalyst Temperature Sensor Low (Bank 1)
Trouble code P0427 means the PCM detects that the catalyst temperature sensor reads a lower temperature than the normal range in engine bank 1.

When do I need to change oil or oil filter

If you have driven your car for more than 5000 miles since you bought the car, then it is time to get the oil changed (https://www.yourmechanic.com/services/change-oil-and-filter) now. Once you get the oil and filter changed, then you should have the...

Car stalls while driving. It will start up after about 10 minutes.

Hi There, What you are describing sounds like an ignition coil pack that may be failing. Ignition coils are prone to this type of erratic functioning or heat cycling when they are beginning to fail due to the temperature fluctuations...

I have a 2015 Chrysler 200 with 7000 miles on it what type of oil should I use full synthetic or 50/50

Hi Mark. For your specific year, make and model, you should use 5W-20 multi-viscosity API SN certified oil that meets Chrysler standard MS-6395. The API certification, viscosity, and the just cited Chrysler standard should be printed on the motor oil...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com