Mercury Marquis Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(16)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(16)

Intake Manifold Gaskets Replacement Estimate for Mercury Marquis

Mercury Marquis Intake Manifold Gaskets Replacement costs $374 on average.

CarServiceEstimateShop/Dealer Price
1984 Mercury MarquisL4-2.3LService typeIntake Manifold Gaskets ReplacementEstimate$445.81Shop/Dealer Price$538.36 - $774.18
1984 Mercury MarquisV6-3.8LService typeIntake Manifold Gaskets ReplacementEstimate$603.63Shop/Dealer Price$730.28 - $1020.84
1979 Mercury MarquisV8-5.0LService typeIntake Manifold Gaskets ReplacementEstimate$447.17Shop/Dealer Price$536.98 - $725.39
1982 Mercury MarquisV8-4.2LService typeIntake Manifold Gaskets ReplacementEstimate$527.79Shop/Dealer Price$637.69 - $886.52
1985 Mercury MarquisL4-2.3LService typeIntake Manifold Gaskets ReplacementEstimate$271.77Shop/Dealer Price$328.36 - $456.18
1981 Mercury MarquisV8-5.0LService typeIntake Manifold Gaskets ReplacementEstimate$447.17Shop/Dealer Price$536.98 - $725.39
1985 Mercury MarquisV6-3.8LService typeIntake Manifold Gaskets ReplacementEstimate$619.63Shop/Dealer Price$745.84 - $1036.06
1983 Mercury MarquisV6-3.8LService typeIntake Manifold Gaskets ReplacementEstimate$619.63Shop/Dealer Price$747.04 - $1038.15
Show example Mercury Marquis Intake Manifold Gaskets Replacement prices

Intake Manifold Gaskets Replacement Service

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0

Luke

16 years of experience
138 reviews
Luke
16 years of experience
Mercury Grand Marquis V8-4.6L - Intake Manifold Gaskets - Saint Louis, Missouri
I am very pleased with my service. Job was completed quicker than expected.

AUDIE

33 years of experience
191 reviews
AUDIE
33 years of experience
Mercury Mountaineer V8-4.6L - Intake Manifold Gaskets - Las Vegas, Nevada
He is the best

Jason

12 years of experience
13 reviews
Jason
12 years of experience
Mercury Grand Marquis V8-4.6L - Intake Manifold Gaskets - Gwynn Oak, Maryland
Great service and very helpful

Kyle

12 years of experience
39 reviews
Kyle
12 years of experience
Mercury Grand Marquis V8-4.6L - Intake Manifold Gaskets - Charlotte, North Carolina
On time. Professional. Knowledgeable. Explained everything well. Took pride in his work. Would DEFINITELY recommend Kyle!

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0
Number of Mercury Intake Manifold Gaskets Replacement services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

2010 Hyundai Santa Fe vs. 2010 Kia Rondo: Which One Should I Buy?
There are two different classes of vehicle represented here: the 2WD SUV in the Santa Fe and the mid-size station wagon or crossover SUV in the Kia Rondo. The difference between these two classes may seem slight, but the crossover...
Symptoms of a Bad or Failing Fan Clutch
If your car has a fan clutch, common signs include the vehicle overheating, the cooling fans working very loudly, or engine performance decreasing.
How to Buy a Personalized License Plate in Louisiana
Ordering Ordering a new license plate in Louisiana is fairly simple but if you’d like to order a personalized license plate, then you need to complete a specific process required by the Louisiana Office of Motor Vehicles. There are...

Heater not working properly, has oil leak.

It sounds like the problem could be with the blower motor resistor. If you only have one speed that the motor works on or the blower motor stops working all together you may need to have this replaced. A technician...

Truck idles, but then dies

Hello. If it starts and runs fine when you adjust the timing and then turns off right after you accelerate then the timing may be changing right then. It may be a distributor problem, or more commonly, a failing timing...

My ac is blowing but not cooling

Hello. An AC that does blow cold air can be caused by many things. A few common causes are low refrigerant, a faulty pressure switch, or a bad compressor. The component responsible for blowing air is the blower motor, however,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com