Mercury Marauder Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(21)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(21)

Brake Pad Replacement Estimate for Mercury Marauder

Mercury Marauder Brake Pad Replacement costs $173 on average.

CarServiceEstimateShop/Dealer Price
1964 Mercury MarauderV8-6.4LService typeBrake Pads - Rear ReplacementEstimate$265.31Shop/Dealer Price$319.04 - $452.33
1963 Mercury MarauderV8-6.6LService typeBrake Pads - Front ReplacementEstimate$245.31Shop/Dealer Price$299.06 - $432.36
2003 Mercury MarauderV8-4.6LService typeBrake Pads - Rear ReplacementEstimate$227.03Shop/Dealer Price$276.21 - $395.80
1965 Mercury MarauderV8-7.0LService typeBrake Pads - Front ReplacementEstimate$245.31Shop/Dealer Price$299.04 - $432.32
2004 Mercury MarauderV8-4.6LService typeBrake Pads - Rear ReplacementEstimate$227.03Shop/Dealer Price$276.22 - $395.83
1968 Mercury MarauderV8-7.0LService typeBrake Pads - Front ReplacementEstimate$245.31Shop/Dealer Price$299.06 - $432.36
1963 Mercury MarauderV8-7.0LService typeBrake Pads - Front ReplacementEstimate$250.31Shop/Dealer Price$303.92 - $437.12
1967 Mercury MarauderV8-6.7LService typeBrake Pads - Front ReplacementEstimate$250.31Shop/Dealer Price$304.29 - $437.78
Show example Mercury Marauder Brake Pad Replacement prices

Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(21)

Rating Summary
21
0
0
0
0
21
0
0
0
0

Warren

15 years of experience
64 reviews
Warren
15 years of experience
Mercury Marauder V8-4.6L - Brake System Flush - Houston, Texas
He did great

David

10 years of experience
193 reviews
David
10 years of experience
Mercury Marauder V8-4.6L - Window Motor / Regulator Assembly Replacement (Driver Side Front) - Philadelphia, Pennsylvania
Does good work I have no complaints

Yoel

9 years of experience
209 reviews
Yoel
9 years of experience
Mercury Marauder V8-4.6L - Ball Joint Front Replacement (Lower Right) - Philadelphia, Pennsylvania
Overall good mechanic knows what he's doing haven't had a problem with his work

Yoel

9 years of experience
209 reviews
Yoel
9 years of experience
Mercury Marauder V8-4.6L - Parking brake won't hold car - Philadelphia, Pennsylvania
All around good mechanic if you're not sure of a problem he'll find it & fix it

Excellent Rating

(21)

Rating Summary
21
0
0
0
0
21
0
0
0
0
Number of Mercury Marauder services completed
231+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

How Does a Heads-Up Display (HUD) Work?
Driver Driver safety has become paramount in recent years. There has been a strong emphasis on ensuring you as a driver can keep your eyes on the road as much as possible. Devices have been incorporated into vehicle controls for...
How Long Does a Fuel Filler Cap Last?
Having Having the right amount of gas in a car is vital in cranking and running the vehicle. Each of the components in the fuels system play a vital role in ensuring that the car runs as it should. The...
Delaware Parking Laws: Understanding the Basics
Delaware Delaware drivers have a lot of rules and regulations to consider when they are out on the road. Of course, they have just as many things to consider once they are getting ready to stop and find a place...

Serial communication malfunction automatic transmission. How do I repair problem?

Hello - please provide more details: problem codes causing Check Engine, year, make and model of car. Thanks for thinking of YourMechanic!

My 2003 Acura MDX Doesn't want to start it cranks the light in the truck will turn on. The battery light, check engine and oil lig

Hi There, This may be related to many different possibilities, some of which may be related to a lack of spark or possibly timing issues and some of which may be related to a fuel delivery problem or a combination...

There is a popping noise every time I put my car into a different gear also at low speeds letting off the gas and hitting the brake it makes the same popping noise and at times when I go to crank the car unless it is on level ground as I'm cranking it it will make the same popping noise around the front and area of the car

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com