Mercury Capri Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Mercury Capri Car Battery Replacement is $255 with $160 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1967 Mercury CapriV8-4.7LService typeCar Battery ReplacementEstimate$434.99Shop/Dealer Price$524.99 - $772.49
1985 Mercury CapriV8-5.0LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1967 Mercury CapriV8-6.4LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1984 Mercury CapriV6-3.8LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$504.99 - $752.48
1983 Mercury CapriL4-2.3LService typeCar Battery ReplacementEstimate$450.11Shop/Dealer Price$548.92 - $822.79
1992 Mercury CapriL4-1.6L TurboService typeCar Battery ReplacementEstimate$420.47Shop/Dealer Price$511.86 - $763.48
1972 Mercury CapriL4-2.0LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$509.87 - $757.28
1979 Mercury CapriL6-3.3LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$510.24 - $757.94
Show example Mercury Capri Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0

Glenn

15 years of experience
62 reviews
Glenn
15 years of experience
Capri 1993 - Clutch Master Cylinder - Alexandria, VA
Glenn was great. He showed up right on time and did a professional job on my clutch repair. I would (and will) hire him again.

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0
Number of Mercury Capri services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

What Causes a Car Door to Give You an Electric Shock After Driving?
Have Have you ever found driving to be positively shocking? For example, you have just driven a long distance on a cold, wintry day, in a car with leather-covered seats. Wearing a heavy woolen coat, you get out of your...
Alaska Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Alaska. Speed limits in Alaska 65 mph: specified areas of the Alaska interstate and on some rural freeways....
How Much Does a Mechanic Make in Montana?
Automotive technician jobs in Montana have an average mechanic salary of $37k, which is approximately the national average.

Full power but no turn over when key is turned

Hey there, I believe you are correct. The most likely cause of this issue you are having would be the ignition switch. The ignition switch is responsible for sending power from the battery to the starter when you turn the...

HOT OIL TRANSMISSION ISSUE

It sounds to me like you are having an issue with the cooling system for your transmission fluid. The transmission fluid is either cooled by the radiator or a separate transmission cooler (https://www.yourmechanic.com/services/radiator-replacement). The fluid is transferred from the transmission...

Changed rack and pinion on 2013 Dodge Ram 1500 has electric assist steering now isn't working ? The steering fuse is good , is the

You will need to have the steering system scanned and reset the steering angle using an scanner that has the capability to do the programming of the new steering rack to the computer.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com