Mercedes-Benz SLK280 Camshaft Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(32)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(32)

Camshaft Position Sensor Replacement Service

How much does a Camshaft Position Sensor Replacement cost?

On average, the cost for a Mercedes-Benz SLK280 Camshaft Position Sensor Replacement is $320 with $225 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Mercedes-Benz SLK280V6-3.0LService typeCamshaft Position Sensor ReplacementEstimate$565.31Shop/Dealer Price$695.39 - $1046.26
2008 Mercedes-Benz SLK280V6-3.0LService typeCamshaft Position Sensor ReplacementEstimate$545.31Shop/Dealer Price$675.42 - $1026.31
2006 Mercedes-Benz SLK280V6-3.0LService typeCamshaft Position Sensor ReplacementEstimate$545.31Shop/Dealer Price$675.42 - $1026.31
Show example Mercedes-Benz SLK280 Camshaft Position Sensor Replacement prices

What is the Camshaft Position Sensor all about?

The camshaft position sensor monitors the position of the camshaft and reports that data to the car’s onboard computer system. This computer system works with sensors and other devices to keep the engine running. With data from the camshaft position sensor (CPS), the fuel injectors know when to fire.

When the sensor malfunctions, the computer does not know when to fire the injectors and may not fire them at all. The faulty readouts may also throw off spark timing, which will affect the car’s fuel economy. This sensor is used in conjunction with the crankshaft position sensor to control ignition timing. It is common for heat and oil leaks to cause this sensor to fail, due to where the sensor is located.

Keep in mind:

  • Damage to the camshaft position sensor is often caused by oil leaks; if this is the case, you may need another part of your car replaced or repaired.
  • When the camshaft position sensor is replaced, the alignment of the timing belt should be monitored so that no fluids leak onto the position sensor mounting area.
  • Some camshaft position sensors will need to have their software updated when they are installed.
  • Timing belts, mass air flow sensors, and crankshaft position sensors can all trigger the trouble code for the camshaft position sensor.

How it's done:

  • Scan test computer for trouble codes.
  • Pinpoint tests as per flow charts.
  • Remove and replace Crankshaft Position Sensor.
  • Clear trouble codes.
  • Check for proper operation and test drive car.

Our recommendation:

The camshaft position sensor isn’t checked in most regular services, but your vehicle has warning signs for when the sensor begins to fail. Because it sends information to the camshaft, when the sensor begins to fail your engine will begin to have trouble. Your engine may have a hard time turning on, staying on, idling, or running smoothly. Your Check Engine warning light should illuminate as well.

What common symptoms indicate you may need to replace the Camshaft Position Sensor?

  • Car stalls or does not start.
  • Car struggles to accelerate (does not maintain speed).
  • Check Engine light is on.
  • Car misfires.
  • Car stumbles or sputters on startup.
  • Car runs poorly or runs rough.

How important is this service?

The camshaft position sensor provides valuable information about the camshaft position to the computer management system. The computer system uses the information from the position sensor to determine when to inject more fuel. Without the sensor’s information, the computer won’t inject fuel properly, and your vehicle will stall or sputter.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(32)

Rating Summary
31
0
0
0
1
31
0
0
0
1

Damian

11 years of experience
430 reviews
Damian
11 years of experience
Mercedes-Benz SLK280 V6-3.0L - Headlight Bulb Replacement (Driver Side Low Beam) - Orlando, Florida
Good

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
Mercedes-Benz SLK280 V6-3.0L - Battery - Oak Park, Illinois
He was punctual, pleasant and fixed the problem expeditiously

Chris

22 years of experience
2223 reviews
Chris
22 years of experience
Mercedes-Benz SLK280 V6-3.0L - Pre-purchase Car Inspection - Laguna Beach, California
As always Chris is skilled thorough and very informed on Mercedes.. Wish i had him check this car before i bought it.

Charles

34 years of experience
342 reviews
Charles
34 years of experience
Mercedes-Benz SLK280 V6-3.0L - Check Engine Light is on - Austin, Texas
Charles was on-time, thorough, and knowledgeable.

Excellent Rating

(32)

Rating Summary
31
0
0
0
1
31
0
0
0
1
Number of Mercedes-Benz SLK280 services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Oxygen Sensor
Oxygen Oxygen sensors help your vehicle control both the fuel and ignition systems, making it a critical component to ensure your car is running and starting smoothly. Boost your ride’s fuel performance and improve emissions output with a properly-functioning oxygen...
How to Replace an AC Evaporator Sensor
The air conditioning pressure evaporator sensor monitors and adapts to the evaporator's temperature, preventing damage and keeping the AC working.
How to Replace a Car Battery Temperature Sensor
The battery has a battery temperature sensor that can fail if the Check Engine Light comes on, the battery voltage is low, or the RPM curve surges.

Check Engine Light on Dodge Ram 1500 with code P0073

Check the condition of the harness that plugs into the sensor to ensure that the sensor is staying plugged in. If you are saying that the sensor is functioning and the voltage does change, then it is possible that your...

Code P0335. Crank position circuit code

Hello. Your crankshaft position sensor has failed. Most engines support a fall-back mode where engine timing is then determined by the cam position sensor. It is less precise than when the crank position sensor is used, but allows the engine...

Gday Chet. My Subaru Liberty has been not starting randomly . Turns over but won't start 1998 Subaru Liberty

Hi there - your instincts are good! I suspect a failing crankshaft position sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-crankshaft-position-sensor) as well. When they fail, there is often no Check Engine indicator. Checking for spark at the plugs during a "no start" event would be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com