Mercedes-Benz S550 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(185)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(185)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz S550 Power Steering Pressure Hose Replacement is $554 with $355 for parts and $199 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Mercedes-Benz S550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$1137.10Shop/Dealer Price$1397.76 - $2097.04
2016 Mercedes-Benz S550V8-4.7L TurboService typePower Steering Pressure Hose ReplacementEstimate$979.28Shop/Dealer Price$1195.27 - $1795.90
2014 Mercedes-Benz S550V8-4.7L TurboService typePower Steering Pressure Hose ReplacementEstimate$979.28Shop/Dealer Price$1195.27 - $1795.89
2009 Mercedes-Benz S550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$1095.10Shop/Dealer Price$1355.74 - $2055.00
2010 Mercedes-Benz S550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$1095.10Shop/Dealer Price$1355.88 - $2055.25
2007 Mercedes-Benz S550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$1095.10Shop/Dealer Price$1355.82 - $2055.14
2017 Mercedes-Benz S550V8-4.7L TurboService typePower Steering Pressure Hose ReplacementEstimate$989.78Shop/Dealer Price$1205.48 - $1805.89
2015 Mercedes-Benz S550V8-4.7L TurboService typePower Steering Pressure Hose ReplacementEstimate$989.78Shop/Dealer Price$1206.26 - $1807.26
Show example Mercedes-Benz S550 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(185)

Rating Summary
167
7
1
2
8
167
7
1
2
8

Robert

12 years of experience
125 reviews
Robert
12 years of experience
Mercedes-Benz S550 V8-5.5L - Car AC Repair - Germantown, Maryland
Performs a great job!

Michael

25 years of experience
187 reviews
Michael
25 years of experience
Mercedes-Benz S550 V8-5.5L - Oil/Fluid Leak - Las Vegas, Nevada
Went above and beyond to get the job done

Miguel

17 years of experience
44 reviews
Miguel
17 years of experience
Mercedes-Benz S550 V8-4.6L Turbo - Brake Pads Replacement (Front, Rear) - Daly City, California
Very fast and efficient Miguel knows his stuff , the dealer gave him wrong rear rotors so he came back the next day in the evening to install and complete my full front and rear brakes with all new rotors totally recommend him for your automotive needs!

Robert

12 years of experience
125 reviews
Robert
12 years of experience
Mercedes-Benz S550 V8-5.5L - Brake Pads Replacement (Front) - Germantown, Maryland
Awesome. Very nice and knowledgeable

Excellent Rating

(185)

Rating Summary
167
7
1
2
8
167
7
1
2
8
Number of Mercedes-Benz S550 services completed
2035+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1000+
experts on our platform

Recent articles & questions

P0251 OBD-II Trouble Code: Injection Pump Fuel Metering Control "A" Malfunction (Cam/Rotor/Injector)
P0251 code definition Injection Pump Fuel Metering Control "A" Malfunction (Cam/Rotor/Injector) What the P0251 code means P0251 is a generic fault code...
How to Replace an ABS Control Module
An ABS module can be a difficult part to replace depending on the manufacturer's design. You may need to reprogram and bleed the system if necessary.
B1923 OBD-II Trouble Code: Air Bag Memory Clear Circuit Short To Ground
B1923 means there is an issue with the airbag system, likely due to a faulty memory module, bad battery, or defective electrical wiring.

How do you open the fuel door?

In order to fill your gas tank, you’ll need to open the fuel door. However, your fuel door is secured in order to prevent possible siphoning attempts. To open the fuel door, you’ll need to use the switch. Here’s how:...

Mileage on dashboard not working

The instrument cluster on your Ford is a common failure. The thing to do is remove the instrument cluster, check for power and grounds at the appropriate connector pins. If power and ground are present, you will need to replace...

I was at a red light an when i hit the gas to drive the car stoped as if i had put it in park, but the power is still on

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com