Mercedes-Benz S420 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz S420 Power Steering Pressure Hose Replacement is $360 with $206 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Mercedes-Benz S420V8-4.2LService typePower Steering Pressure Hose ReplacementEstimate$715.86Shop/Dealer Price$842.91 - $1201.36
1994 Mercedes-Benz S420V8-4.2LService typePower Steering Pressure Hose ReplacementEstimate$572.81Shop/Dealer Price$679.39 - $991.21
1999 Mercedes-Benz S420V8-4.2LService typePower Steering Pressure Hose ReplacementEstimate$701.44Shop/Dealer Price$823.61 - $1178.41
1995 Mercedes-Benz S420V8-4.2LService typePower Steering Pressure Hose ReplacementEstimate$572.81Shop/Dealer Price$679.44 - $991.29
1996 Mercedes-Benz S420V8-4.2LService typePower Steering Pressure Hose ReplacementEstimate$701.44Shop/Dealer Price$827.74 - $1185.63
1997 Mercedes-Benz S420V8-4.2LService typePower Steering Pressure Hose ReplacementEstimate$701.44Shop/Dealer Price$824.00 - $1179.10
Show example Mercedes-Benz S420 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(15)

Rating Summary
14
0
1
0
0
14
0
1
0
0

Jamie

23 years of experience
132 reviews
Jamie
23 years of experience
Mercedes-Benz S420 V8-4.2L - Serpentine/Drive Belt Replacement - Ontario, California
Great job

Whitney

40 years of experience
783 reviews
Whitney
40 years of experience
Mercedes-Benz S420 V8-4.2L - Brake Pads Replacement (Front, Rear) - Palo Alto, California
He is great.

Melvin

18 years of experience
221 reviews
Melvin
18 years of experience
Mercedes-Benz S420 V8-4.2L - Trunk does not lock or open - Atlanta, Georgia
I am a independent private driver, and my trunk, passenger doors, engine light, sunroof all began to malfunction at the same time on my s500 Mercedes Melvin came out in the cold and in 30 minutes knew exactly what all the problems were. His knowledge is superb! I will be using Mr Melvin again.

Anthony

8 years of experience
195 reviews
Anthony
8 years of experience
Mercedes-Benz S420 V8-4.2L - Car is overheating - Sacramento, California
showed up on time did diagnostics right away he was pretty accurate.

Excellent Rating

(15)

Rating Summary
14
0
1
0
0
14
0
1
0
0
Number of Mercedes-Benz S420 services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Door Lock Actuator
Common signs include unusual noises coming from inside the car door and the power door locks not working or behaving erratically.
Why You Should Always Keep a 1/4 Tank of Gas in Your Car
Everyone Everyone knows that keeping gas in your vehicle's fuel tank is a must. But you may wonder what the minimum amount of gas is that you should always have in your fuel tank. Some experts claim that you should...
How to Buy a Personalized License Plate in Missouri
A A personalized license plate is a great way to customize your car. With a personalized plate, you can display a sentiment on the front and back of your car that no one else has. You can cheer on a...

Fuel pressure drops after 30 mins of driving

The fuel pressure regulator has a vacuum diaphragm with a spring keeping a certain amount of pressure on the center of the diaphragm to control the amount of fuel returning to the fuel tank ans keeping the correct amount of...

Every time I start my car the first time I turn my wheel I hear a pop then no problem no more sound and steering seems to work fine.

Sounds like your have bad strut mounts and a broken spring with the spring popping in and out and then getting reset as the spring pops into place. Check the front springs and see if they are cracked or damaged....

I'm trying to cut my VDC líght off .and I'm pressing the button for it and it's still not cutting off

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com