Mercedes-Benz R550 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Mercedes-Benz R550 Fuel Injector Replacement is $1282 with $1073 for parts and $209 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Mercedes-Benz R550V8-5.5LService typeFuel Injector ReplacementEstimate$2398.38Shop/Dealer Price$2973.23 - $4611.16
Show example Mercedes-Benz R550 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0

Michael

21 years of experience
244 reviews
Michael
21 years of experience
Mercedes-Benz SL500 V8-5.0L - Fuel Injector - Fontana, California
this guy is alright he did a very good job

William

34 years of experience
517 reviews
William
34 years of experience
Mercedes-Benz 380SL V8-3.8L - Fuel Injector - Sun City, Arizona
William was wonderful. Very knowledgeable and hardworking. Absolutely the best of the best mechanic.

Nezar

26 years of experience
67 reviews
Nezar
26 years of experience
Mercedes-Benz 190E L6-2.6L - Fuel Injector - Fort Lauderdale, Florida
Super Nice and knowledgeable ! He came -He saw - He repaired ! we loved him :)

Carlos

28 years of experience
501 reviews
Carlos
28 years of experience
Mercedes-Benz SL500 V8-5.0L - Fuel Injector - Fontana, California
he was pretty good iI just hope that the car is fixid this time and will not give me any problems

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0
Number of Mercedes-Benz Fuel Injector Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Car Keypad Locks Work
Pioneered Pioneered by Ford, keypads let you lock, unlock without keys Pioneered by Ford, keypad door systems began appearing on high-end car and SUV products in the early 1980s. Ford took advantage of the then-new digital computer revolution – the...
How to Find Your First Car
Finding the perfect first car is important for a new driver. You want one that fits your personality but also falls within a budget you can afford. Read on for some crucial steps in your search (https://www.yourmechanic.com/article/how-to-buy-a-used-car) for your first...
P2258 OBD-II Trouble Code: Secondary Air Injection System Control A Circuit High
P2258 P2258 Code Definition The P2258 trouble code is a generic powertrain code related to fuel and air metering (air injection circuit). This code appears when the engine control module (ECM) detects higher voltage levels than are acceptable in the...

How do I view the average fuel economy?

The average fuel economy shows you the gas mileage that your vehicle has been averaging. The average fuel economy is directly tied to the trip meters, and will be reset when the trip meter is reset. To view the average...

Car running rough

When your engine computer sees a problem with a major sensor or sees that an engine is misfiring, the computer will turn on the restricted performance statement with a red or amber light. The problem may be one of several,...

I turn the key and I hear the starter spinning but it does not crank the engine. Is it the starter or part of it?

If the starter motor turns, but the starter pinion drive gear is not engaging the flywheel and turning the engine, there is a fault with the pinion drive gear and/or the actuating solenoid. The power to the solenoid can be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com