Mercedes-Benz Metris Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Mercedes-Benz Metris Wheel Bearings Replacement is $577 with $473 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mercedes-Benz MetrisL4-2.0L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$1095.35Shop/Dealer Price$1344.81 - $2063.96
2018 Mercedes-Benz MetrisL4-2.0L TurboService typeWheel Bearings - Driver Side Front ReplacementEstimate$1614.99Shop/Dealer Price$2003.64 - $3144.78
2018 Mercedes-Benz MetrisL4-2.0L TurboService typeWheel Bearings - Passenger Side Front ReplacementEstimate$1614.99Shop/Dealer Price$2003.63 - $3144.77
2018 Mercedes-Benz MetrisL4-2.0L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$1069.35Shop/Dealer Price$1318.81 - $2037.95
Show example Mercedes-Benz Metris Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Andy

30 years of experience
27 reviews
Andy
30 years of experience
Mercedes-Benz Metris L4-2.0L Turbo - Oil Change - Braintree, Massachusetts
Professional and knowledgeable

Steven

10 years of experience
52 reviews
Steven
10 years of experience
Mercedes-Benz Metris L4-2.0L Turbo - Brake Pads Replacement (Front, Rear) - Hacienda Heights, California
Excellent & professional!

Michael

40 years of experience
131 reviews
Michael
40 years of experience
Mercedes-Benz Metris L4-2.0L Turbo - Oil Change - Columbus, Ohio
Mr. Woods was on time and came prepared to do the requested work. He is very knowledgable and professional. He is a walking automotive encyclopedia. I enjoyed meeting him. He gave me a great deal of important information about my truck.

Pierre

9 years of experience
308 reviews
Pierre
9 years of experience
Mercedes-Benz Metris L4-2.0L Turbo - Oil Change - Braintree, Massachusetts
Always a pleasure to deal with every time he works on my vehicles

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Mercedes-Benz Metris services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Why Is it Important to Be Able to Pass an Emissions Test?
Emissions Emissions testing is done for one simple reason – to reduce the amount of pollution created by automobiles on the road today. Most states have at least some counties where testing is mandatory, but it’s more common in areas...
How to Buy a Good Quality Intake Manifold Gasket
One One of the key parts of the engine is the intake manifold, whose main role is to ensure that the right air-fuel mix arrives on time at each of the engine’s cylinders. This small part has a big boost...
The 5 Safest Used Cars You Can Buy For Under $20,000
The Subaru Legacy, Honda Accord, Ford Fusion, Chevy Volt, and the Volvo XC60 are five of the overall safest used cars you can buy for under $20,000.

Steering wheel feels too loose

Steering components do wear over time, but what you're describing sounds excessive. The problem could be play in the steering gear and/or linkage. Your steering wheel connects through the column, to the steering gear, tie rods and finally the steering...

Car will not start. It was running fine, normal shut down, and wouldn't start back up five minutes later.

It really does sound like your battery (https://www.yourmechanic.com/services/battery-replacement) has gone dead. Sometimes they can develop an internal short where they seem fine one moment then go dead the next. The indicators on the chargers usually don't tell the whole story....

My 2005 Chevy Silverado 2500hd 4x4 6.6 manual trans won’t shift gears while running and will with [engine](/topics-engine-chevy/) off, also the clutch engages at floor which never did before. Very hard to press down. Please help me.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com