Mercedes-Benz Metris Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Mercedes-Benz Metris Water Pump Replacement is $527 with $366 for parts and $161 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mercedes-Benz MetrisL4-2.0L TurboService typeWater Pump ReplacementEstimate$926.86Shop/Dealer Price$1126.71 - $1688.00
2016 Mercedes-Benz MetrisL4-2.0L TurboService typeWater Pump ReplacementEstimate$892.86Shop/Dealer Price$1105.52 - $1676.41
2017 Mercedes-Benz MetrisL4-2.0L TurboService typeWater Pump ReplacementEstimate$892.86Shop/Dealer Price$1092.74 - $1654.05
Show example Mercedes-Benz Metris Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Steven

10 years of experience
52 reviews
Steven
10 years of experience
Mercedes-Benz Metris L4-2.0L Turbo - Brake Pads Replacement (Front, Rear) - Hacienda Heights, California
Excellent & professional!

Pierre

9 years of experience
308 reviews
Pierre
9 years of experience
Mercedes-Benz Metris L4-2.0L Turbo - Oil Change - Braintree, Massachusetts
Always a pleasure to deal with every time he works on my vehicles

Rohon

48 years of experience
59 reviews
Rohon
48 years of experience
Mercedes-Benz Metris L4-2.0L Turbo - Pre-purchase Car Inspection - Great Neck, New York
I learned that I can stay hands off and Rohon will make it happen. While keeping me informed.

Michael

40 years of experience
131 reviews
Michael
40 years of experience
Mercedes-Benz Metris L4-2.0L Turbo - Oil Change - Columbus, Ohio
Mr. Woods was on time and came prepared to do the requested work. He is very knowledgable and professional. He is a walking automotive encyclopedia. I enjoyed meeting him. He gave me a great deal of important information about my truck.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Mercedes-Benz Metris services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Car Suspension Systems Work
On the surface it appears the suspension of a car has a pretty straightforward job. If the bumps end up being...
How to Adjust to Driving a Car on the Left Side of the Road
Knowing how to use a right-hand drive vehicle is crucial if you travel or move overseas, as you may be required to drive on the left side of the road.
Industry News for Automotive Techs: October 8-14
50 MPG Chevrolet Cruz Diesel, Mazda's G-Vectoring drive system, Uber and Volvo collaborate on autonomous cars, and Hubb's new reusable oil filter.

My car has a rough idle when I start my car, when I stop at a light my car turns off. Is it the purge sensor?

This may be a result of a dirty or failing idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and...

My automatic car does not move when i let go the brake

Hi there. Sometimes a dragging emergency brake or warped front brake rotors can cause the symptoms you're describing. In worse case scenario, there may be internal damage inside the transmission or the torque converter of your Optima. I would recommend...

Engine Light comes on and car wont accelerate

What you are describing sounds like a dirty or faulty mass air flow sensor. The mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) monitors air intake as it is mixed with fuel prior to being injected into the motor. This sensor relays vital...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com