Mercedes-Benz GLE350 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(27)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(27)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Mercedes-Benz GLE350 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Mercedes-Benz GLE350V6-3.5LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2020 Mercedes-Benz GLE350L4-2.0L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2022 Mercedes-Benz GLE350L4-2.0L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Mercedes-Benz GLE350V6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2021 Mercedes-Benz GLE350L4-2.0L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2017 Mercedes-Benz GLE350V6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Mercedes-Benz GLE350 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(27)

Rating Summary
27
0
0
0
0
27
0
0
0
0

Peter

25 years of experience
524 reviews
Peter
25 years of experience
Mercedes-Benz GLE350 V6-3.5L - Brake Pads Replacement (Rear) - Simi Valley, California
On time and professional. Thank you.

Bryan

8 years of experience
15 reviews
Bryan
8 years of experience
Mercedes-Benz GLE350 V6-3.5L - Oil Change - Las Vegas, Nevada
Friendly, knowledgeable, timely, arrived early for appt. will be requesting him for my next car service.

Desmond

20 years of experience
50 reviews
Desmond
20 years of experience
Mercedes-Benz GLE350 V6-3.5L - Oil Change - Pebble Beach, California
Desmond was great to work with. He completed the repairs ahead of schedule and was friendly in explaining the work that had been performed.

Mazyar

8 years of experience
477 reviews
Mazyar
8 years of experience
Mercedes-Benz GLE350 V6-3.5L - Oil Change - Lawrenceville, Georgia
Mark is great and very knowledgeable

Excellent Rating

(27)

Rating Summary
27
0
0
0
0
27
0
0
0
0
Number of Mercedes-Benz GLE350 services completed
297+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Why Are Objects in the Mirror Closer Than They Appear?
Take Take a second to look at your passenger side view mirror and you’ll see a few words printed at the bottom of the glass. It’s a warning that reads “objects in mirror are closer than they appear.” Objects seen...
Symptoms of a Bad or Failing Fuel Pressure Regulator
Common signs include engine performance issues, fuel leaks, and black smoke coming from the exhaust.
P2616 OBD-II Trouble Code: Camshaft Pos Signal Output Circuit High
P2616 means the camshaft position sensor has released a high output signal due to a faulty, broken or shorted wiring, or fluid contamination.

Ignition interlock problem

Hello. The neutral safety switch allows you to start the car while its in park or in neutral. This is likely the cause of this problem. It is also a possibility that there is a problem with your shifter. You...

fuel injectors are not spraying fuel

Be sure that any engine immobilizer system (security system) is not activated, thus preventing the car from starting. Check for the characteristic, but momentary, whirring sound from the in-tank fuel pump at key "on". If no fuel pump operation is...

Car will overheat if I don't have the fan on. When fan is off it doesn't come on to release heat from engine. So the fan is always on.

Check the wiring to the coolant temperature sensor and see if there is power to the sensor switch. If there is no power, then check the cooling fan relay and see if its clicking on. If there is no clicking...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com