Mercedes-Benz GLE300d Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(24)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(24)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mercedes-Benz GLE300d Control Arm Assembly Replacement is $311 with $159 for parts and $152 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Mercedes-Benz GLE300dL4-2.1L Turbo DieselService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$862.22Shop/Dealer Price$1047.79 - $1568.47
2016 Mercedes-Benz GLE300dL4-2.1L Turbo DieselService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$839.78Shop/Dealer Price$1039.79 - $1576.68
2016 Mercedes-Benz GLE300dL4-2.1L Turbo DieselService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$2000.10Shop/Dealer Price$2490.18 - $3897.31
2017 Mercedes-Benz GLE300dL4-2.1L Turbo DieselService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$469.38Shop/Dealer Price$564.73 - $814.77
2016 Mercedes-Benz GLE300dL4-2.1L Turbo DieselService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$830.22Shop/Dealer Price$1027.88 - $1557.63
2017 Mercedes-Benz GLE300dL4-2.1L Turbo DieselService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$469.38Shop/Dealer Price$564.76 - $814.83
2017 Mercedes-Benz GLE300dL4-2.1L Turbo DieselService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1967.36Shop/Dealer Price$2435.02 - $3802.41
2016 Mercedes-Benz GLE300dL4-2.1L Turbo DieselService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1918.48Shop/Dealer Price$2385.41 - $3713.51
Show example Mercedes-Benz GLE300d Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(24)

Rating Summary
22
2
0
0
0
22
2
0
0
0

Alex

20 years of experience
129 reviews
Alex
20 years of experience
Mercedes-Benz GLE300d L4-2.1L Turbo Diesel - Brake Pads Replacement (Rear) - Saint Charles, Illinois
Great guy!

John

31 years of experience
53 reviews
John
31 years of experience
Mercedes-Benz C280 V6-3.0L - Control Arm Assembly Replacement (Front Lower Left) - Woburn, Massachusetts
Great work! John was able to come by early and finished the job much faster than expected. Very pleasant to deal with and will work with him again in the future!

Michael

27 years of experience
454 reviews
Michael
27 years of experience
Mercedes-Benz S550 V8-5.5L - Control Arm Assembly Replacement (Front Upper Right) - Scottsdale, Arizona
expert!

Elias

14 years of experience
102 reviews
Elias
14 years of experience
Mercedes-Benz CLK350 V6-3.5L - Control Arm Assembly Replacement (Front Lower Right) - Staten Island, New York
Awesome and quick job

Excellent Rating

(24)

Rating Summary
22
2
0
0
0
22
2
0
0
0
Number of Mercedes-Benz Control Arm Assembly Replacement services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1000+
experts on our platform

Recent articles & questions

What Causes Spark Plugs to Wear Out?
Without operational spark plugs, your engine won’t run. If even just one plug were to fail, the change in functionality would...
How to Break in Brake Pads
Having new brake pads and rotors installed happens on a regular basis. Once those brake pads and rotors are mounted, it is...
How to Get Smog Technician Certified in Georgia
Automotive technician jobs include smog certified emissions inspectors. In Georgia, you need to be employed at an emissions testing station.

My car is reading '15% oil life' but the dip stick shows it's full.

Depending on which motor is in your 2009 Honda Civic (1.8L = 3.9 Quarts) or (2.0L = 4.4 Quarts), the oil capacity may be slightly different. It is important to note, however, that the "oil life" indicator in your car's...

I want to find out IF you think it is USUAL to fix a popped timing belt but then just have one problem after another after another

Hi there: First off, I'm sorry to hear about your husband. Our thoughts are with you. In regards to the timing belt issue on your Nissan Maxima, the mechanic is slightly correct. When the timing belt breaks (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-timing-belt) inside the...

I got a remote start installed into my 2007 Honda Accord recently but now it won’t start with the remote or the key. Lights on the dash come on but won’t start. What can it be

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com