Mercedes-Benz GLC63 AMG Brake Drum Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,576)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,576)

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Mercedes-Benz GLC63 AMG Brake Drum Replacement is $427 with $265 for parts and $161 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeBrake Drum ReplacementEstimate$726.04Shop/Dealer Price$875.69 - $1286.36
2018 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeBrake Drum ReplacementEstimate$711.80Shop/Dealer Price$866.42 - $1291.93
Show example Mercedes-Benz GLC63 AMG Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,576)

Rating Summary
5,188
189
54
28
117
5,188
189
54
28
117

David

5 years of experience
4 reviews
David
5 years of experience
Mercedes-Benz GLC63 AMG V8-4.0L Turbo - Pre-purchase Car Inspection - Sugar Land, Texas
David was selected by Your Mechanic to conduct a re-inspection after the initial inspection failed to disclose obvious cosmetic defects. David was thorough in both his inspection of the areas under concern, as well as re-inspecting the entire vehicle's condition in the event the first inspection failed to reveal less obvious defects. David confirmed the suspect cosmetic defects and I'm now working with Your Mechanic to resolve the disparity from the initial PPI conducted which should have disclosed such defects. As to David, he provided a thorough inspection, commentary via voice memos, and appropriate media for me to fully grasp the nature of the car - what should have occurred the first go around. I appreciate his professionalism and I look forward to resolving the disparity with Your Mechanic's customer response team. Things don't always go to plan, the true measure of a company's worth, credibility, and trust, is how they respond to customer's when things deviate from plan. I'm hopeful that Your Mechanic's leadership team will persevere and remedy this situation in a timely fashion. Thank you.

Chet

41 years of experience
493 reviews
Chet
41 years of experience
Mercedes-Benz C230 V6-2.5L - Brake Pads Replacement (Rear) - San Diego, California
Chet is always professional and courteous. He went out of his way to ensure I got the right parts for my car

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Mercedes-Benz C230 V6-2.5L - Canister Purge Solenoid - Spring, Texas
Maxwells is very knowledgeable about his job. He’s very easy to work with an a great talker lol.

Juan

9 years of experience
313 reviews
Juan
9 years of experience
Mercedes-Benz C300 V6-3.0L - Positive Crankcase Ventilation (PCV) Valve - Oviedo, Florida
After seeing 3 other mechanics, to find the source of a whistling noise, and oil dipstick popping out -spewing oil all over my engine 2x! Juan expertly diagnosed the engine like a surgeon! He discovered quickly that I had a clogged PCV valve, which caused the engine to struggle. Juan was expert at replacing this part, and even took the time to show me that part that was clogged by trying to blow air through it. Now that the engine is repaired, my old car feels NEW AGAIN! Thank you so much Juan- you brilliant!!!

Excellent Rating

(5,576)

Rating Summary
5,188
189
54
28
117
5,188
189
54
28
117
Number of Mercedes-Benz services completed
61336+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Veteran and Military Driver Laws and Benefits in Arkansas
The The state of Arkansas offers a number of benefits and perks for those Americans who have either served in an Armed Forces branch in the past, or are current active military members. Vehicle registration benefits Military personnel are exempt...
How to Deal With Glare While Driving at Night
Driving Driving at night (https://www.yourmechanic.com/article/how-to-drive-your-vehicle-safely-at-night-by-cheryl-knight) is hard enough without having to deal with glare. Glare is usually caused by dirty windows or mirrors, bad vision, and the improper use of lights by other drivers. Luckily, you can take some steps...
How to Get Smog Technician Certified in Massachusetts
Automotive technician jobs include smog certified emissions inspectors. In Massachusetts, you must be hired and trained by Parsons to become one.

Leaking power steering oil

You do have a leaking power steering system and if you cannot locate the leak then it may be collecting in the inner tie rod boot and leaking from the rack and pinion side seal. If you're unable to pinpoint...

Is there any way I can bleed brakes without a scanner or special tool? Thanks!

Hello. If you are not able to get pressure to come to the calipers, you will have to use a scan tool to activate the bleed function of the abs. Otherwise, you will not be able to get fluid out...

I got sound when I shift to 3rd gear and it's get hard to put shift to second gear when car is in 3rd gear.

Hello. It sounds as though the synchronizers in the transmission, which are used to adjust transmission internal gear speed when upshifting or downshifting are possibly worn out or you are shifting a bit too fast. It is also possible that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com