Mercedes-Benz GLA35 AMG Car is hard to start Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,576)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,576)

Car is hard to start Inspection Service

How much does a Car is hard to start Inspection cost?

On average, the cost for a Mercedes-Benz GLA35 AMG Car is hard to start Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Mercedes-Benz GLA35 AMGL4-2.0L TurboService typeCar is hard to start InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
* Mercedes-Benz GLA35 AMGL4-2.0L TurboService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2022 Mercedes-Benz GLA35 AMGL4-2.0L TurboService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
* Mercedes-Benz GLA35 AMGL4-2.0L TurboService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
* Mercedes-Benz GLA35 AMGL4-2.0L TurboService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
* Mercedes-Benz GLA35 AMGL4-2.0L TurboService typeCar is hard to start InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
Show example Mercedes-Benz GLA35 AMG Car is hard to start Inspection prices

A car that is hard to start can be a major inconvenience. While this is usually not a life threatening malfunction, it can make getting around much more difficult. There are a number of issues that will make a car hard to start. Everything from the electrical system to the fuel system to the actual starter itself can be the problem.

Finding the root cause of a hard starting engine can take some investigation. Ignoring a hard starting issue can further damage the vehicle, which will often result in a more expensive repair.

How this system works:

In order to get an engine running, it must be turned at speed so that it starts to suck fuel and air into the cylinders, and then compress and ignite this fuel/air mixture.

The starter motor is an electric motor that turns the engine to get it started. The starter motor has a small pinion gear wheel that engages with a larger gear ring at the rim of the engine flywheel.

The starter motor draws the electric current it needs to run from the battery. The starter needs a heavy current and to avoid sparking a solenoid is used. The ignition switch operates the starter motor. When the ignition is turned on, current is fed to the solenoid and into the starter motor. Once the car engine starts and the key is released, the starter motor turns off.

Common reasons for this to happen:

  • Bad Starter: Over time starter motors can wear out and start to malfunction. If this is the problem the starter will have to be replaced. If the car turns over, the problem is not the starter. If nothing happens when the key is turned the problem could be the starter, or if the car turns over very slowly and the dash lights dim while it is cranking, the starter could be the culprit.

  • Bad Relay Wiring: The wiring between the battery and starter can become loose or broken which will prevent the starter motor from functioning. The wiring will need to be replaced or repaired.

  • Low or Dead Battery: The starter motor needs voltage from the battery to operate. If the battery is low or failing it may not produce enough current for the starter motor to function. Charging or replacing the batter should resolve this problem.

It is also possible that the battery terminals have become corroded or loose. Cleaning and tightening the terminals and cables is recommended.

  • Failing Solenoid: A failing solenoid is a common issue with the starter system and if the solenoid is going bad, the car will be difficult to start. The starter will need to be inspected to determine if the problem is the starter motor itself or the solenoid. A failing solenoid will need to be replaced.

  • Failing Ignition Switch: Over time an ignition switch can start to fail and one of the most common symptoms is that the car is hard to start. If the ignition switch is hot to the touch this indicates an issue with the ignition switch wiring. A failing ignition switch will eventually stop working completely and will need to be replaced.

  • Defective Fuel Pump: If the engine is not getting enough fuel, it will be hard, if not impossible to start. The fuel pump is responsible for pulling gas from the tank to the injectors and if it is not delivering enough fuel the car will be difficult to start and eventually will not start at all.

  • Fouled Plugs: Spark plugs create the spark which allows the vehicle to burn fuel. Fouled plugs are one of the most common reasons for a hard starting engine. As electrodes wear down, the voltage required to jump the gap to ignite the fuel increases. This can lead to prolonged cranking before the engine will start.

  • Clogged Fuel Filter: A fuel filter that is clogged can make a vehicle very difficult to start. The fuel filter screens out contaminants and can become clogged over time. This will prevent the injectors from getting enough fuel, making the car hard to start.

  • Contaminated Fuel: Fuel that has too much alcohol or water in it will result in a car that is difficult and often impossible to start. Even if it does start, contaminated fuel can do serious damage to the engine. If contaminated fuel is suspected, have the vehicle inspected immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the hard to start issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The starter, battery, connecting wiring and other important components will be inspected by the mechanic. This may include the vehicle's fuel pump, fuel filter, spark plugs, ignition and more. It may be necessary for the mechanic to crank up the car to verify the problem and issue an accurate diagnosis.

How important is this service?

If a car is hard to start, it's indicative of a major condition preventing normal operation and if left unattended it may lead to the car not starting at all. The vehicle should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,576)

Rating Summary
5,188
189
54
28
117
5,188
189
54
28
117

Martin

29 years of experience
166 reviews
Martin
29 years of experience
Mercedes-Benz 300TE L6-3.0L - Car is hard to start - Nashville, Tennessee
One of my better repair experiences.

Joe

15 years of experience
453 reviews
Joe
15 years of experience
Mercedes-Benz 300TE L6-3.0L - Car is hard to start - Nashville, Tennessee
Joe is now on speed dial:)

Kevin

24 years of experience
536 reviews
Kevin
24 years of experience
Mercedes-Benz CLA250 L4-2.0L Turbo - Car is hard to start - Atlanta, Georgia
Kevin went above and beyond to assist me. He was knowledgeable, quickly diagnosed my car’s problem, and got me back on the road within an hour. If I could give 10 stars I would!

Edgar

10 years of experience
56 reviews
Edgar
10 years of experience
Mercedes-Benz ML320 V6-3.2L - Oil Change - Austin, Texas
He was great! Explained everything in detail and made sure I understood.

Excellent Rating

(5,576)

Rating Summary
5,188
189
54
28
117
5,188
189
54
28
117
Number of Mercedes-Benz services completed
61336+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0600 OBD-II Trouble Code: Serial Communication Link Malfunction
P0600 code definition The P0600 code is a diagnostic trouble code that points to a malfunction in the communication link of the...
Saab Certified Pre-Owned (CPO) Car Program
Many Many drivers who are in the market for a used Saab vehicle want to consider a Certified Pre-Owned, or CPO, vehicle. CPO programs allow owners of used cars to drive with confidence, knowing that their vehicle has been inspected...
Designing YourMechanic Advice
How How the project came to be When people first visit YourMechanic they mostly fall into two groups: “I know what I need - let’s book the service” or “my car is not working and I have no idea why -...

drive gear not working

This sounds like a failed transmission range selection switch. The switch will need to be replaced to restore proper operation of the transmission. You may want enlist the help of a mechanic, such as one from YourMechanic, who will have...

My engine oil has been drying up every 3 months and I can't seem to find any leaks. What could be causing the drying do fast?

All engines use a little oil over time (https://www.yourmechanic.com/article/What-Does-It-Mean-When-My-Car-Is-Burning-Oil_3). If you are using less than a quart of oil for every 750 to 1000 miles with no leaks, then this is considered normal and no action is needed. You should...

Check engine on knocking engine milky cap but not in oil change loud knocking noise while driving and cold start up

Coolant leaks can be external or internal. If the coolant is leaking internally into the cylinders or crankcase, that will require a fairly significant repair. If the coolant is leaking externally, unless the leak is at the head gasket or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com