Mercedes-Benz G550 4x4 Lubricate Driveshaft at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,626)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,626)

Lubricate Driveshaft Service

How much does a Lubricate Driveshaft cost?

On average, the cost for a Mercedes-Benz G550 4x4 Lubricate Driveshaft is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mercedes-Benz G550 4x4V8-4.0L TurboService typeLubricate DriveshaftEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2017 Mercedes-Benz G550 4x4V8-4.0L TurboService typeLubricate DriveshaftEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Mercedes-Benz G550 4x4 Lubricate Driveshaft prices

What is lubricating the driveshaft all about?

Along the drivetrain, whenever torque needs to travel from one place to another, a driveshaft is used. Some cars have two driveshafts under them, usually for four-wheel-drive applications. U-Joints are couplings that hold sections of driveshaft together and can withstand large amounts of torque. The U-joint and the slip both need lubrication to work smoothly. This means lubricant needs to be applied to every point where the driveshaft meets another section of shaft or any other part of the vehicle.

Keep in mind:

  • While lubricating will help with scraping noise and minor vibration, it will not repair actually broken parts.
  • Inspect the parts of the the driveshaft to make sure they do not need full replacement.
  • Even small spots of excess wear are bad on parts that withstand so much torque, no problem is too small to be addressed on the driveshaft.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The slip joints and U-joints on all drive shafts are located
  • The Zerk grease fittings on the slip joint and U-joints are located
  • New grease is pumped into the grease fittings with a grease gun
  • The vehicle is lowered off of the jack stands

Our recommendation:

Check the manual of your vehicle to see if the manufacturer has specific instructions on servicing and lubricating the driveshaft. If the manufacturer suggests it is time for a service or if the vehicle has symptoms of a malfunctioning driveshaft, then it should be done immediately. These parts are under a lot of force and will usually fail when the car is in motion. While under the vehicle, inspect all of the connections along the drivetrain and keep an eye out for any parts that seems excessively worn. Bring a rag and wipe any mud or dust off to check for damage.

What are the common symptoms indicating you need to lubricate the driveshaft?

  • Clicking or grating sounds while the vehicle is in gear
  • Vibration in the vehicle while it is running

How important is this service?

This service is very important. Poor lubrication is one of the top reasons why driveshafts fail. When they do fail, driveshafts will fail while in motion and can take out more expensive parts around them. These preventative maintenance steps are extremely important in order to avoid more costs down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,626)

Rating Summary
5,236
189
54
28
119
5,236
189
54
28
119

Nicholas

11 years of experience
589 reviews
Nicholas
11 years of experience
Mercedes-Benz ML320 V6-3.2L - Lubricate Driveshaft - Durham, North Carolina
Very knowledgeable. Very professional.

Tung

16 years of experience
310 reviews
Tung
16 years of experience
Mercedes-Benz CLA250 L4-2.0L Turbo - Thermostat - Atlanta, Georgia
Very professional and punctual. Got the job done!! Will request again in the future!!

Brock

32 years of experience
49 reviews
Brock
32 years of experience
Mercedes-Benz GLE350 V6-3.5L - Car is not starting - Gilroy, California
Nice person. sorry I no give you tip today because..........

Dominic

28 years of experience
232 reviews
Dominic
28 years of experience
Mercedes-Benz S500 V8-5.0L - Oil Change - Naples, Florida
He came on time and did his work very good.Thank you.

Excellent Rating

(5,626)

Rating Summary
5,236
189
54
28
119
5,236
189
54
28
119
Number of Mercedes-Benz services completed
61886+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Worn Wheel Bearing?
A wheel bearing is a set of steel balls held together by a steel ring. The job of the wheel bearing is to...
How to Get a West Virginia Driver's Permit
West West Virginia uses a graduated license program that requires all new drivers under 18 to begin driving with a learner’s license, in order to practice safe driving under supervision before getting their full driver’s license. To receive the initial...
Understanding Chevrolet Oil-Life Monitor (OLM) System and Lights
Car symbols, or dashboard lights, are a car service reminder. The Chevrolet Oil Light Monitor system indicates when and what service your car needs.

The car won't shift or accelerate, noisy reverse

Hello. Since the Check Engine Light is on, I start by scanning the computer for codes. This will give me a place to start. Most of the time, this is caused by a failing speed sensor on the transmission. When...

Ticking noise in engine does it need valve adjustment??

Hi there. The valves make a ticking noise as they wear, and in order to do any kind of valve adjustment you would need to have the valve clearance checked. If it needs adjustment, then the valve lash adjuster (also...

I have a 2006 Dodge Charger Daytona. I was told I need new ball joints. Along with that the mechanic said it requires new control

The ball joints for the lower arm on your model are vended separately so you do not have to buy the lower control arm with the joint already installed. The reason they want you to change the entire arm is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com