Mercedes-Benz E63 AMG S Blower Motor Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,730)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,730)

Blower Motor Switch Replacement Service

How much does a Blower Motor Switch Replacement cost?

On average, the cost for a Mercedes-Benz E63 AMG S Blower Motor Switch Replacement is $349 with $254 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Mercedes-Benz E63 AMG SV8-5.5L TurboService typeBlower Motor Switch ReplacementEstimate$622.53Shop/Dealer Price$774.42 - $1173.83
2014 Mercedes-Benz E63 AMG SV8-5.5L TurboService typeBlower Motor Switch ReplacementEstimate$602.53Shop/Dealer Price$754.46 - $1153.90
Show example Mercedes-Benz E63 AMG S Blower Motor Switch Replacement prices

What is the Blower Motor Switch all about?

In your car’s HVAC system, the heater core is what creates hot air to warm up the interior during cool weather. The air conditioner and its varied parts cools the air during the summer. The blower motor is what pushes the conditioned (heated or cooled) air out of the dash and into the cabin of the vehicle. Depending on the make and model of your vehicle, you may have one, two or even three blower motors, each with their own blower motor switch.

Essentially, the blower motor switch allows you to control the airflow within your vehicle. It lets you set the fan to off, low, medium or high (or a number of other speeds depending on the system in question). Over time and through normal wear and tear, the contacts inside the switch will wear out and it will fail, requiring a new blower motor switch.

Keep in mind:

  • The blower motor switch isn’t inspected during any maintenance service.
  • Most switches exhibit erratic behavior before failing completely, so you should have some indication about impending failure.

How it's done:

  • The blower motor switch is verified that it needs to be replaced. The blower switch trim panel is removed for access.
  • The defective blower motor switch is disconnected and removed from the trim panel.
  • The new blower motor switch is installed into the panel and the panel is reinstalled.
  • The blower motor switch is tested for operation on all blower speeds.
  • The vehicle is tested to ensure proper A/C and heater operation.

Our recommendation:

Without a functional blower motor switch, you’ll be unable to control the fan and fan speed for your car’s HVAC system. That could mean anything from being uncomfortable, to being dangerously overheated or chilled depending on the weather conditions. If you suspect your blower motor switch is not working properly, have its operation checked by one of our expert mechanics.

What common symptoms indicate you may need to replace the Blower Motor Switch?

  • Erratic operation (fan operates in some switch positions but not others, for instance)
  • Blower motor will not operate at all

How important is this service?

Although a failed blower motor switch will not prevent you from driving, it is important to be comfortable in your car and have clear, unfogged windows. Have the problem inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Jay

37 years of experience
968 reviews
Jay
37 years of experience
Mercedes-Benz S430 V8-4.3L - Car is hard to shift - Rancho Cucamonga, California
Courteous, clear and sincerely helpful in his explanations.

Collins

12 years of experience
532 reviews
Collins
12 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Oil Change - Atlanta, Georgia
On time, knowledgeable, courteous

Travis

15 years of experience
165 reviews
Travis
15 years of experience
Mercedes-Benz C300 V6-3.0L - Windshield Washer Pump Replacement (Front) - Plano, Texas
Travis was knowledgeable and completed the work efficiently and properly.

Phillip

17 years of experience
85 reviews
Phillip
17 years of experience
Mercedes-Benz GL450 V8-4.6L - Brake Pads Replacement (Front, Rear) - San Antonio, Texas

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

3 Essential Things to Know about Four-Wheel Drive (4WD)
Four-wheel Four-wheel drive is a form of drivetrain. A four-wheel drive vehicle has two or more axles, which provide power to four wheel ends. These vehicles have a transfer case, which means the front and rear drive shafts will be...
How to Buy Good Quality Snow Chains
If If you live in an area where snowfall is a possibility, then you need to be prepared for winter driving conditions. That means having a set of tire chains in your trunk in case the snow becomes deep enough...
Symptoms of a Bad or Failing Strut Assembly
Common signs include knocking noises when driving over bumps, a bumpy ride, floating front end, and uneven tire wear.

I keep getting OBD-II codes P0171 and P0174

Since you have codes that both banks are lean then the problem will most likely be from air entering the intake manifold after the mass air sensor. The idle air control valve should not have any air leaks from the...

03 range rover cranks but will not start. getting injector and camshaft sensor errors. Sensors are brand new.

Hi there. Quite often, when you replace sensors and still are getting the error codes, it's due to the OBD-II trouble codes not being reset after the repairs being completed. However, it could also be a problem with the electrical...

Replaced battery 2015 Chrysler 200 starts runs gear knob turns but light is stuck on neutral and won't go

It sounds like you may have a faulty transmission control module. The transmission control module has various sensors such as vehicle speed sensors, wheel speed sensors, throttle position sensors, turbine speed sensor (https://www.yourmechanic.com/services/transmission-speed-sensor-replacement), and transmission fluid temperature sensors that all...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com