Mercedes-Benz E550 Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(63)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(63)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Mercedes-Benz E550 Intake Manifold Gaskets Replacement is $458 with $80 for parts and $378 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Mercedes-Benz E550V8-5.5LService typeIntake Manifold Gaskets ReplacementEstimate$607.42Shop/Dealer Price$671.66 - $826.11
2008 Mercedes-Benz E550V8-5.5LService typeIntake Manifold Gaskets ReplacementEstimate$583.09Shop/Dealer Price$638.99 - $787.17
2014 Mercedes-Benz E550V8-4.7L TurboService typeIntake Manifold Gaskets ReplacementEstimate$583.33Shop/Dealer Price$628.71 - $752.73
2013 Mercedes-Benz E550V8-4.7L TurboService typeIntake Manifold Gaskets ReplacementEstimate$583.33Shop/Dealer Price$628.71 - $752.72
2007 Mercedes-Benz E550V8-5.5LService typeIntake Manifold Gaskets ReplacementEstimate$583.09Shop/Dealer Price$646.06 - $799.56
2009 Mercedes-Benz E550V8-5.5LService typeIntake Manifold Gaskets ReplacementEstimate$583.09Shop/Dealer Price$639.77 - $788.54
2010 Mercedes-Benz E550V8-5.5LService typeIntake Manifold Gaskets ReplacementEstimate$583.09Shop/Dealer Price$639.18 - $787.51
2012 Mercedes-Benz E550V8-4.7L TurboService typeIntake Manifold Gaskets ReplacementEstimate$583.33Shop/Dealer Price$628.71 - $752.72
Show example Mercedes-Benz E550 Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(63)

Rating Summary
59
1
1
0
2
59
1
1
0
2

Tinashe

14 years of experience
781 reviews
Tinashe
14 years of experience
Mercedes-Benz E550 V8-5.5L - Auxiliary Battery - Marietta, Georgia
He has worked on my vehicle several times and he always does an excellent job.

Derrick

12 years of experience
184 reviews
Derrick
12 years of experience
Mercedes-Benz E550 V8-5.5L - Auxiliary Battery - Vallejo, California
Derrick showed up earlier than planned which was great and he knew exactly to do, did it efficiently and left no mess and was done in a jiffy. GREAT JOB DERRICK. Thank you, My Mechanic. Will definitely continue using this service

Ediee

6 years of experience
48 reviews
Ediee
6 years of experience
Mercedes-Benz E550 V8-5.5L - Oil Change - Las Vegas, Nevada
This mechanic has lot of knowledge...Very professional.

Richard

14 years of experience
601 reviews
Richard
14 years of experience
Mercedes-Benz E550 V8-5.5L - Spark Plugs - Las Vegas, Nevada
This guy know what he's doing,he answer all you questions..5 stars for him...Thanks body.

Excellent Rating

(63)

Rating Summary
59
1
1
0
2
59
1
1
0
2
Number of Mercedes-Benz E550 services completed
693+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Mississippi
Right-of-way Right-of-way laws in Mississippi are comprised of important rules that define who is going to be able to proceed through intersections and other areas where vehicles and pedestrians come into contact, and who will have to wait. These rules...
How Long Does a Positive Crankcase Ventilation (PCV) Valve Last?
Your Your car’s engine operates by mixing air with fuel and then burning it. This obviously creates waste gases. Most of those gases are routed out of the engine, through the exhaust and then out the muffler. However, that can’t...
P0764 OBD-II Trouble Code: Shift Solenoid C Intermittent
P0764 means a faulty shift solenoid and irregular voltage readings; caused by a failed shift solenoid, internal ATF blockages

Whistling noise when press in on clutch

Hey there. It sounds like the noise comes around when you are using the clutch which sounds to me like you may have an issue with your throwout bearing. The part on the vehicle may have been faulty and failed...

Possible problem with alternator

Hello. You are correct, the next step is to remove and test, or just go ahead and replace the alternator. Replacement aftermarket alternators for the 2001 Pontiac Grand Am cover years 2000-2003. So reasonably you can conclude that the alternator...

2001 mitsubishi montero limited. Need to calibrate idle air valve.

Hello. In order to properly adjust idle speed on this vehicle you will need a scan tool. The vehicle will need to be put in relearn mode to do so. Over time the computer will adapt on its own if...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com