Mercedes-Benz E55 AMG Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(22)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(22)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Mercedes-Benz E55 AMG Throttle Body Replacement is $903 with $749 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Mercedes-Benz E55 AMGV8-5.5LService typeThrottle Body ReplacementEstimate$1668.74Shop/Dealer Price$2053.20 - $3184.31
2001 Mercedes-Benz E55 AMGV8-5.5LService typeThrottle Body ReplacementEstimate$1658.83Shop/Dealer Price$2038.43 - $3165.89
2004 Mercedes-Benz E55 AMGV8-5.5L TurboService typeThrottle Body ReplacementEstimate$2409.39Shop/Dealer Price$2976.70 - $4667.14
2000 Mercedes-Benz E55 AMGV8-5.5LService typeThrottle Body ReplacementEstimate$3975.11Shop/Dealer Price$4933.85 - $7798.57
1999 Mercedes-Benz E55 AMGV8-5.5LService typeThrottle Body ReplacementEstimate$3987.41Shop/Dealer Price$4953.27 - $7830.26
2005 Mercedes-Benz E55 AMGV8-5.5L TurboService typeThrottle Body ReplacementEstimate$2409.39Shop/Dealer Price$2977.08 - $4667.81
2006 Mercedes-Benz E55 AMGV8-5.5L TurboService typeThrottle Body ReplacementEstimate$2409.39Shop/Dealer Price$2976.74 - $4667.21
2003 Mercedes-Benz E55 AMGV8-5.5L TurboService typeThrottle Body ReplacementEstimate$2409.39Shop/Dealer Price$2976.70 - $4667.13
Show example Mercedes-Benz E55 AMG Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0

Jose

16 years of experience
249 reviews
Jose
16 years of experience
Mercedes-Benz E55 AMG V8-5.5L - Drive Belt Tensioner Replacement - Riverview, Florida
Friendly,Professional and an expert ,great work in a timely manor , Thank you Jose

Jonathan

27 years of experience
88 reviews
Jonathan
27 years of experience
Mercedes-Benz E55 AMG V8-5.5L - Oil/Fluid Leak Inspection - Roswell, Georgia
Very good. Answered all questions.

Bryan

6 years of experience
64 reviews
Bryan
6 years of experience
Mercedes-Benz E55 AMG V8-5.5L Turbo - Battery - Los Angeles, California
Great mechanic..excellent work..will be using him again

Jason

33 years of experience
617 reviews
Jason
33 years of experience
Mercedes-Benz E55 AMG V8-5.5L Turbo - Oil Change - Burlingame, California
Excellent!

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0
Number of Mercedes-Benz E55 AMG services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

The 10 Things to Check in a Pre-Purchase Inspection
A pre-purchase inspection will help you feel assured about a buying a used car. Check warning lights, fluids, tires, suspension, and brakes in a PPI.
How to Replace Rear Car Brake Shoes
Car brakes consist of disc brakes or drum brakes. Brake shoes are a part of drum brakes and provide the full braking power needed to stop a car.
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost pressure sensor B input circuit range or performance...

Misfiring and emissions leak in 2000 Ford Crown Vic

It all depends on what you think of the vehicle. These Crown Victoria can run for an awfully long time, but you'd want to find out what this misfiring is to keep this car up and going. If the misfiring...

Temperature gauges jumping and fan not running on a 2008 Avenger

Of course, the fans have to work correctly. They might not work for lots of reasons. First thing is to put in a new thermostat. Because, if you've got a stick in thermostat, the engine can get hot, but then...

blower motor only works sometimes

You may have a blower motor that has "dead spots" when it's winding. Sometimes you can tap on the motor if it doesn't start to move again. I would try performing this simple tap test and if it starts to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com