Mercedes-Benz E250 Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Mercedes-Benz E250 Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Mercedes-Benz E250L4-2.1L Turbo DieselService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2015 Mercedes-Benz E250L4-2.1L Turbo DieselService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2016 Mercedes-Benz E250L4-2.1L Turbo DieselService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz E250 Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Chris

18 years of experience
495 reviews
Chris
18 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Oil Change - Richmond, Texas
Chris was prompt and very professional. He was very knowledgeable. Finished with my Mercedes on time and the place he stayed and work was very clean, no mess.

Ronald

41 years of experience
341 reviews
Ronald
41 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Battery - Spring, Texas
Ron was awesome! On time, knowledgeable, fast and friendly.

Daniel

21 years of experience
346 reviews
Daniel
21 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Check Engine Light is on - Houston, Texas
Knowledgeable and friendly. Definitely recommend.

Daniel

21 years of experience
346 reviews
Daniel
21 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Oil Change - Manvel, Texas
Daniel completed the service efficiently and quickly.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Mercedes-Benz E250 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does an Oil Pump Cover Gasket Last?
In In order for the oil in your car to get to where it needs to go, it will need the right amount of pressure. There are a number of different systems and parts on a car that help to...
Rules of the Road For Wisconsin Drivers
Have Have you recently moved to Wisconsin and/or are you planning on doing some driving in this beautiful state? Whether you’ve lived in Wisconsin all your life or visiting, you might want to brush up on the rules of the...
P2776 OBD-II Trouble Code: Upshift Switch Circuit Low
P2776 means a problem signal was detected from the upshift switch circuit usually due to electrical issues or liquid being spilled on the switch.

What does the Release Parking Brake message mean?

The Release Parking Brake message can appear on your driver information center (DIC). When the DIC displays this alert, then your parking brake is currently engaged. If you receive this alert, release the parking brake before driving your vehicle.

1999 Mercedes ML430 starts, I can move the shifter, but it doesn't go into gear. Just stays in park.

A differential can indeed fail without warning, but there are usually some ugly noises associated with it. As for your shifter, I believe your model still uses a lever connection between the shifter and the transmission. It should be easy...

I have toyota tundra 4.7 2007 the battery light show before start my car but when start its gone , is normal stay ON before start?

The alternator charging light should be on when key is on without engine running. As soon as you start the engine the light should be off if the system is charging. Since you are getting 13.7 volts after it starts...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com