Mercedes-Benz CLS55 AMG Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a Mercedes-Benz CLS55 AMG Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Mercedes-Benz CLS55 AMGV8-5.5L TurboService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$139.99 - $158.75
Show example Mercedes-Benz CLS55 AMG Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Todd

26 years of experience
95 reviews
Todd
26 years of experience
Mercedes-Benz CLS55 AMG V8-5.5L Turbo - Oil Change - Newport News, Virginia
Thank you for your great service! I will order you next time.

Michael

16 years of experience
606 reviews
Michael
16 years of experience
Mercedes-Benz CLS55 AMG V8-5.5L Turbo - Control Arm Assembly Replacement (Front Lower Right) - Norcross, Georgia
Overall great service and person.

Salim

30 years of experience
49 reviews
Salim
30 years of experience
Mercedes-Benz CLS55 AMG V8-5.5L Turbo - Oil/Fluid Leak - Oakland, California
Salim won't steer you wrong will tell you the truth without doing unnecessary work

Carlos

21 years of experience
47 reviews
Carlos
21 years of experience
Mercedes-Benz CLS55 AMG V8-5.5L Turbo - Crankshaft Position Sensor Replacement - Pearland, Texas
Carlos was very professional, efficient and thorough with his work. He's very knowlegeable in his field of work and was very cordial with offering advise. I will never go back to my old mechanic again! I recommend Carlos VERY HIGHLY!

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Mercedes-Benz CLS55 AMG services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Traction Control Module Last?
The The traction control in your vehicle assists you in driving on slippery surfaces and helps your wheels keep traction on the road. The system is normally activated when the throttle input and engine torque do not match the surface...
How to Replace a Lost or Stolen Car Title in Florida
Without Without your car’s title, you cannot register it in Florida, or in another state if you’re moving out of Florida. In addition, you can’t sell it, trade it in, or use it as collateral for a loan. Obviously, this...
How to Troubleshoot a Parking Brake or Emergency Brake That Won't Engage
Emergency brakes won't engage if the parking brake lever or pedal is out of adjustment or there are worn brake shoes or brake pads.

Car using a lot more gas

Lack of maintenance may be the cause for the drop in fuel economy. The vehicle does not have variable valve operation, but does have displacement on demand where the engine's computer actually shuts down cylinders to save some fuel. Have...

Catalytic converter replacement

Hello. It's quite possible that there is no one at fault here. It may just be unfortunate timing. I'm assuming that you have had the codes read (https://www.yourmechanic.com/article/how-to-read-and-understand-check-engine-light-codes-by-jason-unrau) and that is why you have decided you need to replace the...

Code P0505 will not reset

Code P0505 (https://www.yourmechanic.com/article/p0505-obd-ii-trouble-code-idle-control-system-malfunction-by-jay-safford) stands for Idle Air Control (IAC) Malfunction. Anything that affects the idle control system could be the cause. This could be anything from the IAC control circuit (PCM, wiring, etc.) to a mechanical problem such as a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com