Mercedes-Benz CLS500 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(40)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(40)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Mercedes-Benz CLS500 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Mercedes-Benz CLS500V8-5.0LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example Mercedes-Benz CLS500 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(40)

Rating Summary
35
3
0
1
1
35
3
0
1
1

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Mercedes-Benz CLS500 V8-5.0L - Power Steering Fluid Service - Jacksonville, Florida
Awesome and knowledgeable mechanic! Will request again.

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
Mercedes-Benz CLS500 V8-5.0L - Alternator - Los Angeles, California
Ricardo is a very excellent mechanic. He does all he can to correct the problem. His friendly demeanor makes you feel very comfortable he will do his best!

Chris

22 years of experience
2239 reviews
Chris
22 years of experience
Mercedes-Benz CLS500 V8-5.0L - Serpentine/Drive Belt - Corona Del Mar, California
As last time, he was on time, friendly, knowledgeable and explained everything to me & last but not least the price was less. I am very pleased.

William

34 years of experience
538 reviews
William
34 years of experience
Mercedes-Benz CLS500 V8-5.0L - Crankshaft Harmonic Balancer - Phoenix, Arizona
Great mechanic very savvy, job was completed successfully A+

Excellent Rating

(40)

Rating Summary
35
3
0
1
1
35
3
0
1
1
Number of Mercedes-Benz CLS500 services completed
440+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Intake Manifold Runner Control
Common signs include difficulty starting the engine, the Check Engine Light coming on, engine misfires, and a decrease in power and acceleration.
How Long Does a Door Lock Cylinder Last?
We We don't usually think about our door lock. It's just a part on our car that we expect to work at all times, so we can safely lock up our vehicle and the belongings we keep inside. Of course...
How Much Do Car Maintenance Costs Increase with Mileage?
The average car costs $1,400 to maintain up to 25,000 miles, then costs rise rapidly until 100,000 miles. Toyota wins as the cheapest car to maintain.

04 Nissan car starts to overheat consistently at around 14-17km distance even after having the water pump and radiator replaced.

Hi there. If the vehicle does not have a thermostat, it needs to have one installed. The cooling system, including the water pump and radiator is virtually useless unless the thermostat opens the radiator to allow coolant to flow through...

will a 2008 engine from a pontiac g6 gt fit in my 2006 pontiac g6 gt

The 2006 engine is a LX9 motor and the 2008 engine is a LZ4 motor and they are different. I have never tried to swap these two motors to see the differences and would recommend to replace the motor with...

I have a new question.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com