Mercedes-Benz CL600 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz CL600 Power Steering Pressure Hose Replacement is $615 with $264 for parts and $351 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Mercedes-Benz CL600V12-5.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$2047.78Shop/Dealer Price$2518.12 - $3783.43
2014 Mercedes-Benz CL600V12-5.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$1089.00Shop/Dealer Price$1335.15 - $1907.91
2001 Mercedes-Benz CL600V12-5.8LService typePower Steering Pressure Hose ReplacementEstimate$1401.99Shop/Dealer Price$1709.59 - $2360.24
2010 Mercedes-Benz CL600V12-5.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$1973.78Shop/Dealer Price$2444.08 - $3709.36
2012 Mercedes-Benz CL600V12-5.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$2021.28Shop/Dealer Price$2500.60 - $3772.66
2006 Mercedes-Benz CL600V12-5.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$1880.65Shop/Dealer Price$2307.92 - $3317.56
2002 Mercedes-Benz CL600V12-5.8LService typePower Steering Pressure Hose ReplacementEstimate$1436.49Shop/Dealer Price$1742.45 - $2391.86
2003 Mercedes-Benz CL600V12-5.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$1915.15Shop/Dealer Price$2345.28 - $3357.06
Show example Mercedes-Benz CL600 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
4
1
0
0
1
4
1
0
0
1

Patrick

33 years of experience
1408 reviews
Patrick
33 years of experience
Mercedes-Benz CL600 V12-5.8L - Crankshaft Position Sensor - Austin, Texas
Good guy. Arrived 5 minutes early (6:55 A.M.). Got the job done quickly. Excellent knowledge and experience.

Christian

12 years of experience
40 reviews
Christian
12 years of experience
Mercedes-Benz CL600 V12-5.5L Turbo - Water Pump - Valley Village, California
great mecanic. very helpful.

Kenneth

20 years of experience
775 reviews
Kenneth
20 years of experience
Mercedes-Benz CL600 V12-5.5L Turbo - Brake Pads Replacement (Front) - Los Angeles, California
Very knowledgeable and deligent with his work. He is prompt and always on time.

Fred

17 years of experience
389 reviews
Fred
17 years of experience
Mercedes-Benz CL600 V12-5.8L - Oil Change - Spring, Texas
Always very good as usual

Excellent Rating

(6)

Rating Summary
4
1
0
0
1
4
1
0
0
1
Number of Mercedes-Benz CL600 services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy For a Graduation Gift
Your Your little bundle of joy has grown up and on the cusp of entering adulthood. Graduating is a milestone, and you want to reward their hard work and show how proud you are. Buying a used car is a...
How to Buy a Good Quality License Plate Light
Whether Whether you are replacing a license plate light, or adding one to your vehicle to be sure that your license plate is visible in all sorts of weather, buying a good quality license plate light can be simple. Cops...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Wyoming
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Wyoming through the Universal Technical Institute.

Brakes squeaking as I reverse out of garage

You are correct about the noise happening when the rotors get wet and then sit overnight they will get a light film of rust on the rotors and this will cause a squeak in the brakes until you stop a...

My doors no longer lock automatically when the car is in motion. Why is that?

The automatic door locking feature can be enabled or disabled with the master lock switch. To turn the door locking feature on, press and hold the master lock switch down for about five seconds. You will hear a beep when...

Check engine light is on in 2008 Mazda 3..already replaced gas cap and tightened it. Light went off after filling tank with high t

There are quite a few reasons why the check engine light (https://www.yourmechanic.com/article/what-does-the-check-engine-warning-light-mean-by-spencer-cates) illuminates, with an EVAP system malfunction (e.g., loose or defective gas cap) just one possibility. If you request a check engine light diagnostic (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) a certified mechanic from...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com