Mercedes-Benz C63 AMG Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Mercedes-Benz C63 AMG Power Steering Pump Replacement is $872 with $452 for parts and $420 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Mercedes-Benz C63 AMGV8-6.3LService typePower Steering Pump ReplacementEstimate$2608.30Shop/Dealer Price$3159.23 - $4743.15
2009 Mercedes-Benz C63 AMGV8-6.3LService typePower Steering Pump ReplacementEstimate$1341.01Shop/Dealer Price$1580.52 - $2268.12
2008 Mercedes-Benz C63 AMGV8-6.3LService typePower Steering Pump ReplacementEstimate$1341.01Shop/Dealer Price$1580.71 - $2268.45
2010 Mercedes-Benz C63 AMGV8-6.3LService typePower Steering Pump ReplacementEstimate$1460.93Shop/Dealer Price$1730.60 - $2508.27
2011 Mercedes-Benz C63 AMGV8-6.3LService typePower Steering Pump ReplacementEstimate$1519.33Shop/Dealer Price$1803.38 - $2591.84
2013 Mercedes-Benz C63 AMGV8-6.3LService typePower Steering Pump ReplacementEstimate$1846.19Shop/Dealer Price$2200.63 - $3225.73
2014 Mercedes-Benz C63 AMGV8-6.3LService typePower Steering Pump ReplacementEstimate$1846.19Shop/Dealer Price$2199.57 - $3223.88
Show example Mercedes-Benz C63 AMG Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(34)

Rating Summary
34
0
0
0
0
34
0
0
0
0

Jean

16 years of experience
157 reviews
Jean
16 years of experience
Mercedes-Benz C63 AMG V8-6.3L - Oil Change - Saint Petersburg, Florida
Jean did a great job working on my car so I had him perform maintenance on my wife's car as well. It's very convenient having work performed at my home instead having to drop the vehicle off somewhere and then having to return at some unspecified time.

Laith

11 years of experience
14 reviews
Laith
11 years of experience
Mercedes-Benz C63 AMG V8-6.3L - Power Outlet is not working - Daly City, California
Great work and effective, Thanks for solving my issue, my power outlet is working again!!

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
Mercedes-Benz C63 AMG V8-6.3L - Oil Change - Norwalk, California
Great mechanic, helps and educates you on what your vehicle needs and doesn’t mind answering questions..

Jesus

17 years of experience
68 reviews
Jesus
17 years of experience
Mercedes-Benz ML350 V6-3.5L - Power Steering Pump - Carson, California
Jesus work on my ML350 today (December 26, 2015 / in our driveway) replacing the power steering pump, in which he finish it on time. He test the steering wheel, tire, pump and belts to make sure that they all working properly. He check the pump several times if there is any sign of fluid leaking.

Excellent Rating

(34)

Rating Summary
34
0
0
0
0
34
0
0
0
0
Number of Mercedes-Benz Power Steering Pump Replacement services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Obtain an L3 ASE Study Guide and Practice Test
Automotive technician jobs pay more if you’re ASE certified. Get study guides & practice tests for L3 Light Duty Hybrid/Electric Vehicle Specialists.
Symptoms of a Bad or Failing Lateral Link
Common signs include the steering feeling loose, noticeable clunking sounds, and increased wear on the rear tires.
P2649 OBD-II Trouble Code: ‘A’ Rocker Arm Actuator Control Circuit High Bank 1
P2649 P2649 code definition ‘A’ Rocker Arm Actuator Control Circuit High Bank 1 What the P2649 code mean P2649 is an OBD-II code for the engine control module (ECM) detecting the ‘A’ rocker arm actuator control circuit for bank 1...

Car leaking oil, oil blows out of dip stick tube

If you had excessive blowby from worn rings and all, then you would have excessive smoking and oil consumption through the engine. It almost sounds like your PCV (positive crankcase ventilation) system is not feeding blowby gasses back to the...

Squealing and clicking noise from back part of the car but only when moving forward

Hello, thank you for writing in. The first step is to definitively determine if the noise happens when the vehicle is moving (and it is brake or wheel related), or if the noise happens constantly when the vehicle is running....

Hey Jay, what should I charge someone for bleeding their brakes on a 04 tc?

Brake system flush will be the same as bleeding and will be a minimum of one hours labor.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com