Mercedes-Benz C63 AMG Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz C63 AMG Power Steering Pressure Hose Replacement is $509 with $257 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Mercedes-Benz C63 AMGV8-6.3LService typePower Steering Pressure Hose ReplacementEstimate$840.10Shop/Dealer Price$987.65 - $1387.78
2014 Mercedes-Benz C63 AMGV8-6.3LService typePower Steering Pressure Hose ReplacementEstimate$1081.26Shop/Dealer Price$1284.56 - $1872.79
2011 Mercedes-Benz C63 AMGV8-6.3LService typePower Steering Pressure Hose ReplacementEstimate$777.38Shop/Dealer Price$914.40 - $1306.62
2012 Mercedes-Benz C63 AMGV8-6.3LService typePower Steering Pressure Hose ReplacementEstimate$1081.26Shop/Dealer Price$1284.68 - $1873.01
2008 Mercedes-Benz C63 AMGV8-6.3LService typePower Steering Pressure Hose ReplacementEstimate$821.18Shop/Dealer Price$967.32 - $1366.38
2010 Mercedes-Benz C63 AMGV8-6.3LService typePower Steering Pressure Hose ReplacementEstimate$777.38Shop/Dealer Price$915.02 - $1307.72
2013 Mercedes-Benz C63 AMGV8-6.3LService typePower Steering Pressure Hose ReplacementEstimate$1081.26Shop/Dealer Price$1284.77 - $1873.15
Show example Mercedes-Benz C63 AMG Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0

Laith

11 years of experience
14 reviews
Laith
11 years of experience
Mercedes-Benz C63 AMG V8-6.3L - Power Outlet is not working - Daly City, California
Great work and effective, Thanks for solving my issue, my power outlet is working again!!

Jean

16 years of experience
157 reviews
Jean
16 years of experience
Mercedes-Benz C63 AMG V8-6.3L - Oil Change - Saint Petersburg, Florida
Jean did a great job working on my car so I had him perform maintenance on my wife's car as well. It's very convenient having work performed at my home instead having to drop the vehicle off somewhere and then having to return at some unspecified time.

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
Mercedes-Benz C63 AMG V8-6.3L - Oil Change - Norwalk, California
Great mechanic, helps and educates you on what your vehicle needs and doesn’t mind answering questions..

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Mercedes-Benz E430 V8-4.3L - Power Steering Pressure Hose - Lawrenceville, Georgia
Arrived early. Friendly. Knowledgeable. Saved me money by not replacing unnecessary things. Quick and very efficient.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0
Number of Mercedes-Benz Power Steering Pressure Hose Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0015 OBD-II Trouble Code: Camshaft Position B - Timing Over-Retarded (Bank 1)
P0015 code definition Camshaft Position “B” - Timing Over-Retarded (Bank 1) What the P0015 code means P0015 is the OBD-II generic code...
What to Check For Before Using a Drive-Through Self-Serve Car Wash
Drive-through car washes can use brushes, cloths, or are touchless. Spray-on wax or polish isn't as effective as products that are applied by hand.
Driving Laws and Permits in the State of Indiana
Whether Whether you are a disabled driver or not, it is important to understand the disabled driver laws in your state. Each state has its own specific requirements and regulations for disabled drivers. Indiana is no exception. What types of...

Car radio works, pops, and then stops working

From the information provided on your Honda, it leads me to believe that the problem may be found in one of two places: the stereo itself or the wiring for the speakers. While is is possible to have all the...

When driving it feel like the tires are wobbling, but they are not.

You should not drive the vehicle until having the wheels checked to make sure they are seated correctly and secured tightly. If the rims are seated and tight then you may have a bad tire that have broken internal steel...

My 95 Honda Civic is only running on 3 cylinders.

Any time you have a misfiring cylinder the easiest thing to do is to replace the spark plugs and check the plug wires to see if valve cover leaks oil onto plug wires in spark plug holes. If it does...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com