Mercedes-Benz C55 AMG Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Mercedes-Benz C55 AMG Hazard / Turn Signal Flasher Replacement is $193 with $98 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Mercedes-Benz C55 AMGV8-5.5LService typeHazard / Turn Signal Flasher ReplacementEstimate$311.65Shop/Dealer Price$385.82 - $552.07
2006 Mercedes-Benz C55 AMGV8-5.5LService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$365.86 - $532.14
Show example Mercedes-Benz C55 AMG Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0

Pardeep

21 years of experience
1121 reviews
Pardeep
21 years of experience
Mercedes-Benz C55 AMG V8-5.5L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right, Front Lower Left, Front Lower Right) - San Jose, California
Friendly and fast - new control arms were mounted and now my clunking issue is gone. Very happy!

Dan

39 years of experience
1005 reviews
Dan
39 years of experience
Mercedes-Benz C55 AMG V8-5.5L - Pre-purchase Car Inspection - Oakwood, Georgia
Shot straight with me. Highly recommended.

Tien

23 years of experience
903 reviews
Tien
23 years of experience
Mercedes-Benz C55 AMG V8-5.5L - Serpentine/Drive Belt - Dublin, California
Top notch professional arrived early and finished sooner than I expected. You can’t ask for more when you book Mr.Tien.

Matthew

17 years of experience
53 reviews
Matthew
17 years of experience
Mercedes-Benz C55 AMG V8-5.5L - Alternator - Kansas City, Missouri
AAA first class job. On time for complicated job, completed within estimate. couldn't be happier.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0
Number of Mercedes-Benz C55 AMG services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Renew Your Car Registration in Washington
Like Like all other states, Washington requires vehicle owners to pay to have their car registered. Registration must be renewed each year. The money obtained from registration is used by the state to maintain the roads, to operate the public...
How to React When You Hit a Pet With Your Car
You can help if you hit a cat or dog while driving. Stop immediately, call for help, and move the animal to a safer place.
What Does the Lane Departure Warning Light Mean?
The lane departure light means the vehicle is detected to be moving out of its current lane without signaling. It may assist to keep you in your lane.

SRS airbag light on

Hello! An airbag light will usually set due to a fault in the SRS circuit. Most of the time it will set due to a open squib in the SRS circuit. A squib is simply the factory term for air...

Check engine light is on, shows cam sensor that I already replaced two times. Still the same code for camshaft sensor. It starts if I unplug cam sensor

Hello there, thanks for writing in. I'd be happy to help. If you replaced the sensor twice and the issue persists, then I would look at the connector and ECM as possible sources of the issue. I would carefully inspect...

My car's windshield wiper only works sometimes

Hello. Most of the time on this vehicle the reason why the wipers stop working is because of the park sensor for the wipers. This detects the position of the wipers and that is used for operation. If the sensor...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com