Mercedes-Benz C43 AMG Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mercedes-Benz C43 AMG Control Arm Assembly Replacement is $228 with $60 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Mercedes-Benz C43 AMGV6-3.0L TurboService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$1257.62Shop/Dealer Price$1505.24 - $2232.71
1998 Mercedes-Benz C43 AMGV8-4.3LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$367.64Shop/Dealer Price$405.30 - $500.74
2018 Mercedes-Benz C43 AMGV6-3.0L TurboService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$595.91Shop/Dealer Price$703.32 - $1020.53
2000 Mercedes-Benz C43 AMGV8-4.3LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$457.54Shop/Dealer Price$520.96 - $694.51
1999 Mercedes-Benz C43 AMGV8-4.3LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$898.14Shop/Dealer Price$1074.79 - $1572.88
2000 Mercedes-Benz C43 AMGV8-4.3LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$516.94Shop/Dealer Price$592.63 - $800.57
2000 Mercedes-Benz C43 AMGV8-4.3LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$516.94Shop/Dealer Price$592.10 - $799.64
2000 Mercedes-Benz C43 AMGV8-4.3LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$475.34Shop/Dealer Price$540.03 - $716.32
Show example Mercedes-Benz C43 AMG Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Jerry

31 years of experience
48 reviews
Jerry
31 years of experience
Mercedes-Benz C43 AMG V8-4.3L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Las Vegas, Nevada
Jerry did a great job. definitely knows MB. very clean operation.

John

33 years of experience
1126 reviews
John
33 years of experience
Mercedes-Benz C43 AMG V6-3.0L Turbo - 40,000 Miles Maintenance Service - Seabrook, Texas
Great guy. Very helpful. I will use him again

Jeremy

21 years of experience
802 reviews
Jeremy
21 years of experience
Mercedes-Benz C43 AMG V8-4.3L - Oil/Fluid Leak - Delray Beach, Florida
Very honest, knowledegable and friendly guy. He's a car buff too and will talk about his cars!

Jerry

31 years of experience
48 reviews
Jerry
31 years of experience
Mercedes-Benz C43 AMG V8-4.3L - Windshield Washer Pump Replacement (Front) - Las Vegas, Nevada
Jerry did a great job. we ended up needing one more part, so the job is not totally complete. But he did great.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Mercedes-Benz C43 AMG services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Is It Safe to Drive With the Transmission Temperature Light On?
Most people don’t know very much about vehicle transmissions, and realistically, why should they? All you want to do is get in...
How to Get Free Gas
Free gas is easy to get if you pay attention at the gas station and look online for deals. Follow these tips on how to get free gas for your car.
4 Essential Things to Know About Your Car’s Muffler
The The muffler on a vehicle is designed to reduce the amount of noise coming from the exhaust system of your automobile. The muffler quiets the sound pressure that the engine creates by using acoustic quieting, which means the muffler...

With car off, exterior and interior lights start flashing

It sounds like somehow the anti theft system was activated and drained the battery. Try locking all of the doors from the inside and close them. Then lock, unlock, lock and unlock the doors to see if the problem persists....

Low idle, sometimes stall, lack of power, putting sound.

Depending on the size of the crack in the manifold, this could potentially cause something like this to happen, however it may also be related to other issues as well. Stalling (https://www.yourmechanic.com/services/car-is-stalling-inspection) and lack of power may be also caused...

Coolant leak that appears to come from the side of the head where the hose is going into the head. Exhaust separated from manifol

If the valve timing is off, due to a jumped or broken timing belt, that can lead to damage to the valves and pistons on the particular type of engine that you have (yours is a so-called "interference" engine). With...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com