Mercedes-Benz C320 Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(61)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(61)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a Mercedes-Benz C320 Car is slow to accelerate Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Mercedes-Benz C320V6-3.2LService typeCar is slow to accelerate InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2005 Mercedes-Benz C320V6-3.2LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2003 Mercedes-Benz C320V6-3.2LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2001 Mercedes-Benz C320V6-3.2LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2004 Mercedes-Benz C320V6-3.2LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
Show example Mercedes-Benz C320 Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(61)

Rating Summary
57
0
2
0
2
57
0
2
0
2

Luis

18 years of experience
329 reviews
Luis
18 years of experience
Mercedes-Benz C320 V6-3.2L - Alternator - Somerset, New Jersey
Excellent work Luis thank you

Doug

34 years of experience
139 reviews
Doug
34 years of experience
Mercedes-Benz C320 V6-3.2L - Check Engine Light is on - Mira Loma, California
Seemed knowledgeable, and timely. Told me what was wrong even with the confused look on my face.

Alfred

13 years of experience
519 reviews
Alfred
13 years of experience
Mercedes-Benz C320 V6-3.2L - Interior Door Handle Replacement (Passenger Side Front) - Oakland, California
He was a very good mechanic

Allen

36 years of experience
471 reviews
Allen
36 years of experience
Mercedes-Benz C320 V6-3.2L - Electric Problems - Deland, Florida
Would highly recommend Allen for your car servicing. Allen was on time, highly professional and knowledgeable.

Excellent Rating

(61)

Rating Summary
57
0
2
0
2
57
0
2
0
2
Number of Mercedes-Benz C320 services completed
671+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Why Is One Wiper Blade Longer Than the Other?
Your Your windshield wipers are responsible for cleaning a viewable area on your windshield. They swipe back and forth to remove rain, snow, ice, dirt, and other debris. Their primary purpose is to ensure that the driver is able to...
Maintenance Minder and Service Codes For Acura Cars
Acura scheduled maintenance is tracked by the Acura Maintenance Minder system. Main codes A and B combine with sub codes for exact service, like A1.
P3481 OBD-II Trouble Code: Cylinder 11 Deactivation/Intake Valve Malfunction
P3481 means an issue in engine cylinder 11 caused by cylinder 11 deactivation solenoid connection, restricted oil pressure or fuel pressure issues.

If the air is too cold, motor knocks on startup

As strange as it may sound, the oil filter that was used during one of your oil changes may be the root cause. GMC Technical Service Bulletin (TSB) 10-06-01-003C has detailed technical information showing that some non ACDelco oil filters...

Car rattling.

This engine rattling on acceleration may be a computer reprogram that would fix if the noise is what is called pinging or pre-ignition. The problem of the noise at idle and on acceleration may be another problem and I would...

how much does it cost to do a 2008 chevy impala engine swap

Prior to replacing the whole engine, you should obtain a diagnosis of both the loss of power issue and the noise. There are some noises that originate from accessories and there are also noises from the valve train and repair...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com